CZ Purlin Roll Forming Machine C Z U Section Profile Shape

Standard 80-300 CZ Purlin Changeover Roll Forming Machine 1.5-3.0 mm thickness
 
The machine is used for steel z purlin channel making, products can be used for building and housing. The machine works stably and no noise. In addition, it's easy to control and operate. It uses PLC control system to get the best efficiency. Our machines are welcomed by global customers for high precision, especially in Russia and middle east. We can customize machines according to customer's requirements and offer free after-sale service.
 

Technical Parameters:

Welcome to send us your profile drawing.

Machine parameters:
 

1. Pre-cutting :
Cutting type: hydraulic, connect with the punching hydraulic unit
Cutting power by hydraulic, 5.5KW AC motor
Hydraulic working pressure: 12-16Mpa
Feeding of the last cut profile from the equipment: automatic if the length of the last profile is not less than 1500 mm
Cutting motion: The roll forming part is NON-stop when cutting
Material of blade:Cr12 with heat treatment
Length measuring: Automatic encoder length measuring, brand: Omron
Tolerance of length: +/- 1.5mm each piece end product
 
 
2. Forming section:
Thickness range: 1.5-3.0mm
Maximum production speed: not less than 10 meters per minute (for non-perforated profiles, excluding cutting)
Main motor power:4kw, AC motor, motor inside of main machine 
Machine Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
Roll station: 20 stations
Roller material:ASTM52100 chrome plated surface with hardness 58-62 degree ,CNC,
Shaft diameter: 76mm material: SAE1045 with quenching and tempering
Transmission: by gear box for each station
 
Advantage:
- In order to keep the product shape and precision, cast iron structure, motor reducer drive, chain transmission, roller surfaces polishing, hard plating, heat treatment.
- The polished surface and the heat treatment towards the molds also can keep the molding plate surface smooth and not easy to be marked when it is being stamped.