Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
Application:
This production line is used for coil with different specifications, through uncoiling, leveling and cutting to length to flattened plate as needed length and width.This line is composed of coil car, double support uncoiler, pre-leveler, finish-leveler, length gauge, cut to length machine, stacker, servo driven system, etc. as well as pendulum middle bridge, pressing and guiding device and steering device.
Main technical parameter:
1. Application material: Cool rolled steel
2. Tensile strength: σb≤450Mpa;
3. Yield strength: σs≤245Mpa;
4. Material thickness: 0.5-2.5mm(Max.)
5. Material width: 700-1250mm(Max.);
6. Rolled coil inner dia.: 508mm;
7. Rolled coil outer dia.: 800-1500mm(Max.)
8. Weight of rolled coil: 10 T(Max.)
9. Finished products parameter:
10. Specified length :500-3000
11. Tolerance of diagonal line: ±1.5mm(L≤2000mm)
12. Tolerance: L=±1.0mm(L≤2000mm)
Other technical parameter:
Power supply: 380V/50Hz/3Ph
Linear speed: 80
Power capacity: approx.: 80KW
Stacking height;350 mm
Stacking weight:5T
Compressed air: pressure P= 0.8mpa
Cover area for production line: approx.: 28m*8.5m
Unit direction and line elevation:
(1) Direction of the unit is from right to left (facing the operation platform);
(2) Operating height line: +800mm.
Standard equipments of machine:
| 5 tons hydraulic un-coiler | 1 |
| Guiding equipment | 1 |
| Slitting equipment | 1 |
| Cutting equipment | 1
|
| Hydraulic stations | 2 |
| PLC control panel | 1 |
| Support tables | 2 |
| Spare parts | 1 wooden tooling box |
Production line’s equipment configuration and function description:
Transverse liner: coil→ feeding → unwinding → feeding → pre-levelingl machine → looping → correction →precise leveling machine → measurement → shearing machine → stacking.
What is the difference with our standard cut to length and economical one?
Compared with standard cut to length, the economical type does not have 1) hydraulic guiding-pressing, shovel-head, pinch and feeding device
The user must use crane to lift and guild the sheet head to the leveling unit
2) hydraulic swing beam shearing machine: QC12Y-6X2000
The user must use manual plasma cutter machine to cut the sheet.
Communication with customers
A: How to cut sheet with one side small width and one side big width sheet by this machine?
B: First, there is a double edge slitting unit, it is for slitting scrape edge of the hot rolled steel plate to get the exact width for light pole, and then we can use our taper slitting unit to cut the steel sheet into 2 pieces with one side small and one side bigger sheet. There is a dolly in the front of the slitting unit. It is for control the taper cutting degree. By change the position of the stopper on dolly to control the taper slitting rate.
A: How many models do we have for cut to length?
B: We have three kinds, 6X1600-12meters(the max cutting length is 12meters), 6X1600-14 meters(max 14 meters) and 6X1600-16 meters(max 16 meters)
A: How long is your quality guarantee period
One year. And when the machine arrives at customer workshop, we will send engineer to commissioning machine and give training. But also, the client can let their engineer to our workshop to study before delivery.
Packaging Details
Seaworthy packaging standard. Some small components or spare parts will be packed in wooden box. For big machine stands or components, we will use pe film for packing or pack it according to customers special request.
