Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
Customized Galvanized Metal Roof Panel Floor Deck Roll Forming Machine
Floor Deck Roll Forming Machine is used to produce metal panel for constructing structure decks. Due to the reasonable structure and high-performance materials, it can ensure high efficiency and stability while producing metal panels with rigidity and low deformation.
Machine Specification:
| Suitable material | Galvanized Sheet, 45# Steel, galvanized steel, ppgi, GI | |
| Thickness of raw material | 0.6-1.5mm | |
| Yield strength of material | 235-450Mpa | |
| Working Speed | about8-10M /min | |
| Step distance | adjustable according to requirement (>=250mm) | |
| Power Requirement | Main motor power: | 5.5Kw (Depend on final design) |
| Hydraulic station power: | 5.5Kw (Depend on final design) | |
| Uncoiler's loading capacity | Max. Capacity: 5000kgs (can be increased to be 10T) | |
| Controlling system | Mitsubishi PLC & converter | |
| Machine's size | about 18m×1.5m× 1.4m (Depend on final design) | |
Special requirement pls feel free to contact us
De-coiler—→Level device —→Main roll forming machine—→Hydraulic cutting—→ Run out table
Descrption of some parts lines
Hydraulic Un-coiler
Width of raw material: 1250mm
Max Capacity: 10ton
Max out diameter of coil: 1800mm Inner
diameter of coil: 500-600mm Hydraulic
feed and brake
Shearing Device
The material of blade: Cr12 with Heat treatment HRC60-62
Main Forming System
| Feeding width: | 1219mm | Product width: | 1000mm |
| Height of waves: | 50mm | Thickness of sheet: | 0.7-1.6mm |
| Roller stations: | 30 rows | Material of Roller | Cr12 |
Electrical System
PLC and HMI touch Screen
Automatic length measurement
Automatic quantity measurement
Over current protection for control system, aviation plugs
Cutting off type: Paused to cut, moving automatically after
cutting.
Power: 380V 60Hz
Drawings of Floor Deck,welcome to send us your design
After-Sales Service
1 - The seller will offer the service of designing and calculation, far-distance guidance for free within 2 years.
2- The reply from the seller will be within 24 hours after receiving the buyer’s technical requirements.
3- The seller will help the buyer to prepare all the necessary data/information to build the project in within 2 years.
Guarantee
1 . If any parts of the machine are damaged by man-made, the seller only charge for the basic cost.
2 . The guarantee period for rollers, shafts, cutting blade and bending paddles is 5 years from date of the machine arrives in the destination, Not included Damage man-made.
