Active Member
|
[China]
Address: No.106, north changjiang road, new district, wuxi china
Contact name:Jayson
Wuxi YBT Machinery Equipment Co.,Ltd. |
|
|
20 forming stations Cable Tray Roll Forming Machine 14m / min
Main technical parameters:
1 . Raw material request:G350-G450Mpa cold rolled or hot rolled steel,galvanized steel
2 . Material thickness:0.5mm-1.0mm
3 . Whole line working speed:14m/min
4 . We adopt cantilever type machine structure
5 . 20 forming stations
6 . Motor power:2x11kw Siemens brand
7 . Material max. thickness:0.8-1.5mm
8 . The diameter of the shaft:75mm
9 . Rollers material: GCr15,quenching treatment:HRC58-62°
10 .Material of shaft:40Cr heat treatment
11 .Driving system:chain drive 1.2”HRB brand made in China
12 .With fully automatic adjustment from one width to another width it just needs few seconds to finish changing:
Width from 50mm to 200mm: we use 1x 2.2KW motor.
Whole line components:
| 3 Ton hydraulic decoiler with control box and hydraulic station | 1 set |
| Leveling machine | 1 set |
| Servo-feeder and control cabinet | 1 set |
| 200T punching press | 1 set |
| Punching mould for cable tray 50-200mm width | 1 set |
| Punching mould for cable tray 50-100mm height | 5 sets |
| PLC control box(main forming machine) | 1 set |
| 50-100x50-200mm Full automatic roll forming machine | 1 set |
| Flying shear with servo-motor control | 1 set |
| Cutting blade with end-expand | 1 set |
| Hydraulic station for cutting | 1 set |
| Outables | 2 sets |
Working process:
Feeding → Hydraulic punching → Guiding → Roll forming → Hydraulic
cutting → Carrier out of product
Detailed information:
. The diameter of the shaft:75mm
. Rollers material: GCr15,quenching treatment:HRC58-62°
. 20 forming stations
. Driving system:chain drive 1.2”HRB brand made in China
After-sale service:
1 . Installation and training of roof forming machine:
a . If buyers visit our factory and check the machine, we will
teach you how to install and use the machine, and also train your
workers/technician face to face.
b . Without visiting, we will send you user manual and video to
teach you to install and operate.
c . If buyer needs our technician to go to your local factory,
please arrange board and lodging and other necessary things.
2 . After Service of roof forming machine:
a . One year guarantee for whole roof forming machine.
b . 24 hours technical support by email or calling
c . If there is any problem found of the roof forming machine, we
will repair it for free in one year.
