Home Companies Program Thermal Tech (Luoyang) Co., Ltd

OD40mm High Temperature Tube Furnace Vertical Tubular Furnace 1400C

Contact Us

[China]

Trade Verify

Address: No.6 Wuhan South Road, Jianxi District Luoyang, Henan, China Working hours: Mon-Sat: 8:00AM-17:30 PM

Contact name:Lee

Program Thermal Tech (Luoyang) Co., Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

OD40mm High Temperature Tube Furnace Vertical Tubular Furnace 1400C

Country/Region	china
City & Province	luoyang henan
Categories	Hardware Stock

Product Details

Product Overview for Laboratory Hydrogen Vertical Tube Furnace

PTV D40/300/14 is a highly customized CE certified OD40mm Hydrogen vertical tube furnace with complete vacuum sealing flanges. Furnace tube was build with alumina tube. The furnace equips with a auto PLC controlled ignition device on the top, when detect the H2 gas release from the outlet, it will automatically ignite the gas. The heating zone is heated by SiC rod up to 1400°C. It is an excellent furnace to process threadiness, powder, small steel parts materials under Hydrogen gas, and also can be used for nano or film growth by CVD.

Main Features

Tmax 1400 °C
Vertical tube furnace, Hydrogen gas atmosphere
Dual steel structure, non-split furnace chamber built on a small trolley, easy to move
Multiple atmosphere processes in a single cycle are available
Fiber-insulated chamber with powerful SiC rod heating elements
PLC controlled temperature setting interface and gas filling system
Alumina tube with sealing flanges
Long life type S thermocouple
CE certified, standard

Safety Measures

Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.
Overheat protection shuts down the tube furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions
Power failure protection resumes furnace operation right after the point of failure when power is reestablished
Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot

Product Gallery

Front View for 1400C Hydrogen Vertical Tube Furnace

Side view for 1400C Hydrogen Vertical Tube Furnace

Technical Specifications

Model No.	PTV D40/300/14
Heating zone	Heating zone length 300mm Uniform temp zone: 150mm
Power supply	2KW AC230V, 50/60Hz, single phase
Working temperature	Tmax 1400°C Continuously 1300°C
Temperature controller	7" touchscreen panel with PLC controlled temperature setting, microprocessor-based PID control and self-tuning, touchscreen panel Programmable segments for heating, cooling and dwelling. Built-in PID Auto-Tune function with overheating & broken thermocouple protection. Over-temperature protection and alarm allow for operation without attendant(s). +/- 1 ºC temperature accuracy.
Heating rate	≤20°C /min
Thermocouple	S type
Chamber lining	Mitsubishi raw material high alumina 1600 grade fiber board
Furnace tube	Alumina tube OD40 Temperature resistance 1400 degree C
Vacuum flanges	Pair of SS304 flanges with needle valves
Atmosphere gas	Hydrogen, Argon, Nitrogen, etc
Heating element	SIC heating element Note: Heating elements are consumable, and not covered by warranty, we recommend to order extra set of heaters as spareparts
Shipping info	Weight: 120kgs W660xL980xH1600mm
Compliance	CE, ISO
Warranty	2 years limited warranty with lifetime technical support

Application Notes

Don't fill any explosive gasses such as Hydrogen or Methane into the furnace tube without necessary safety controls and supervision
1400C tube furnaces with alumina tube are designed for use under vacuum and low pressure; 0.2 bars / 3 psi / 0.02 MPa
To minimize the cracking rate of the ceramic tubes, please change the position (mark four points on the tube) each batch
Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating