Wuxi High Mountain Hi-tech Development Co.,Ltd |
Verified Suppliers
|
|
ISO/GB Standard HDPE Pipe 1.25Mpa For Water Supply Agriculture Farm Pipe Systems
----------------------------------------
Basic Info.
There are many classification methods of HDPE pipes, which can be divided into water supply pipes, gas pipes, aluminum-plastic composite pipes, buried drainage pipes, agricultural irrigation pipes and electrical casings according to the application field; according to the pressure conditions, they can be divided into pressure pipes and non-pressure pipes. , water supply pipes and gas pipes belong to the category of pressure pipes.
Outer Diameter DN (mm) | SDR 9 PN20 | SDR 11 PN16 | SDR 13.6 PN12.5 | SDR 17 PN10 | SDR21 PN8 | SDR26 PN6 | Packing Loaded into 40GP/Piece 6m or 12m per Piece |
Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | Wall Thick Ness(mm) | ||
75 | 8.4 | 6.8 | 5.6 | 4.5 | 1085 | ||
90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | 754 | |
110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 | 504 |
125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 | 378 |
140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 | 304 |
160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 | 224 |
180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 | 182 |
200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 | 143 |
225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 | 110 |
250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 | 90 |
280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 | 72 |
315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 | 56 |
355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 | 42 |
400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 | 30 |
450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 | 25 |
500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 | 20 |
560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 | 16 |
630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 | 12 |
710 | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 | 9 | |
800 | 72.7 | 58.8 | 47.4 | 38.1 | 30.6 | 6 | |
900 | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 | 6 | |
1000 | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 | 4 | |
1200 | 88.2 | 67.9 | 57.2 | 45.9 | |||
1400 | 102.9 | 82.4 | 66.7 | 53.5 | |||
1500 | 110.2 | 88.2 | 71.4 | 57.6 | |||
1600 | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
High-density polyethylene has good heat resistance and cold
resistance, good chemical stability, high rigidity and toughness,
and good mechanical strength. Dielectric properties and
environmental stress cracking resistance are also good. Hardness,
tensile strength and creep are better than low-density
polyethylene; abrasion resistance, electrical insulation, toughness
and cold resistance are all better, but slightly worse than
low-density insulation; good chemical stability, at room
temperature Under the conditions, it is insoluble in any organic
solvents, resistant to corrosion by acids, alkalis and various
salts; the film has low permeability to water vapor and air, and
low water absorption.
Details
Application
Urban water pipe network system
Replaceable cement, cast iron and steel pipes
Industrial raw material pipeline
Landscaping water supply network
Pipes for sewage discharge
agricultural irrigation pipes
marine pipeline
Seawater desalination pipeline
Certificate
Company Profile
High Mountain Pipe Management Industry is mainly use HDPE
recycled plastic to develop and produce plastic industrial film.
Production of non-toxic, green, corrosion-resistant, and good
performance MUHDPE alloy pipes, HDPE national standard corrugated
pipes, HDPE national standard corrugated pipes, EPTU three-wall
seismic and impact resistant pipes, HDPE steel belts to increase
strength spiral corrugated pipes, SRWPE plastic steel dimensional
winding pipes , HDPE double wall corrugated pipe, FRPP double wall
reinforced corrugated, HDPE water supply pipe, CPVC cable
protection pipe, PE porous general cable protection pipe, FRP sand
pipe, plastic inspection well and related supporting series
products. Provide research and development for different municipal
construction pipe network projects. Integrated services in
production, sales, installation and engineering skills
FAQ
Q: How can you guarantee the goods you offer is qualified?
A: We always believe honesty and responsibility are basis of one
company, so whatever products we provide for you all are qualified.
We will have goods tested and provide COA before delivery for sure.
Q: How and when can I receive my goods after payment?
A: For small batch products, they will be delivered to you by
international express (DHL, FedEx, TNT, etc.) or by air. It usually
takes 3-5 days to receive the goods after delivery. For high-volume
products, it is worthwhile to see the goods and deliver them. It
takes several days to several weeks to reach the destination port,
depending on the location of the port.
Q: Is the price on this page correct?
A: The listed prices are for reference only, please contact us
directly for the latest prices.