Wuxi High Mountain Hi-tech Development Co.,Ltd |
Verified Suppliers
|
|
Factory Cheap Price Double Large Diameter Straight Length 1000mm
Pipes For Cold Water Supply Hdpe Pipe
----------------------------------------
Basic Info.
1. Hot melt connection.
Hot-melt connection is a special heating tool, which heats the
parts to be connected of polyethylene pipes or fittings under
pressure, disassembles the heating tool after melting, connects the
two fusion surfaces under pressure, and maintains a period of time
under stable pressure until the joint cools . Hot-melt connections
include hot-melt butt connections, hot-melt socket connections, and
hot-melt saddle connections.
The most commonly used pe pipes in rainwater collection systems
2. Electrofusion connection.
The electrofusion connection is to use the special electrofusion
tube embedded with the resistance wire to make close contact with
the connection part of the PE pipe and the pipe and electrify.
Electrofusion connections can be used to connect polyethylene pipes
or plug pipes of different types and melt flow rates. Electrofusion
connections are divided into electrofusion socket connections and
electrofusion saddle connections.
3. Plug-in flexible connection.
PE water supply pipe manufacturer socket type flexible connection
is a new connection method developed with reference to the
principle of socket type flexible connection of cast iron pipe and
polyvinyl chloride pipe (PVC-U). PE water supply pipe manufacturer
welds a reinforced polyethylene socket at one end of the
polyethylene pipe .
Model (inner diameter) | |||||||
Ф20 | Ф25 | Ф32 | Ф40 | Ф50 | Ф63 | Ф75 | Ф90 |
Ф110 | Ф125 | Ф140 | Ф160 | Ф180 | Ф200 | Ф225 | Ф250 |
Ф280 | Ф315 | Ф355 | Ф400 | Ф450 | Ф500 | Ф560 | Ф630 |
Ф710 | Ф800 | Ф900 | Ф1000 | Ф1200 |
|
|
Advantage
1. HDPE pipe has good stress crack resistance: HDPE pipe has low notch sensitivity, high shear strength and excellent scratch resistance, and the environmental stress crack resistance is also very prominent.
2. Good impact resistance at high temperature: The high temperature embrittlement temperature of polyethylene is extremely low, and it can be used safely in the temperature range of -60-60 °C. During construction in summer, due to the good impact resistance of the material, the pipe will not be brittle.
3. Good chemical corrosion resistance: HDPE pipe fittings are resistant to corrosion by a variety of chemical media, and chemical substances in the soil will not cause any degradation to the pipeline. Polyethylene is an electrical insulator, so it does not decay, rust or electrochemically corrode; it also does not promote algae, bacterial or fungal growth. Nonetheless, there is the release of harmful substances when extinguished.
Various properties of frpp pipes you don't know
4. Good wear resistance: The comparison test of wear resistance between HDPE pipe and steel pipe shows that the wear resistance of HDPE pipe is 4 times that of steel pipe. In the field of mud conveying, compared with steel pipes, HDPE pipes have better wear resistance, which means that HDPE pipes have longer service life and better economy.
5. Anti-aging and long service life: polyethylene pipes containing 2-2.5% of carbon black evenly distributed can be stored in the open air or used for 50 years without being damaged by ultraviolet radiation.
6. Reliable connection: The polyethylene pipe parts are connected by electrothermal fusion, and the strength of the joint is higher than that of the pipe body.
Details
Application
HDPE pipes are mainly used for: municipal engineering water supply
systems, indoor water supply systems in buildings, outdoor buried
water supply systems and residential quarters, buried water supply
systems in factories, repair of old pipelines, water treatment
engineering pipeline systems, gardening, irrigation and other
fields of industry water pipes, etc.
However, it should be noted that HDPE pipes cannot be used for hot
water lines.
Certificate
Company Profile
High Mountain Pipe Management Industry With 19 years of
experience in R&D, production and sales of plastic pipe
fittings, HDPE pipes are of good quality. In order to meet the
actual needs of modern high-quality buildings and the design
concept of environmental protection and silence, the company has
introduced advanced production equipment and manufacturing
technology, and has successively developed grooved ( HDPE) HDPE
mute, HDPE grooved mute pipe, HDPE grooved drainage pipe
compression drainage system and HDPE siphon drainage system series
products. HDPE is a highly crystalline, non-polar thermoplastic
resin. The appearance of the original HDPE is milky white, and it
is translucent to a certain extent in the thin section. PE has
excellent resistance to most household and industrial chemicals.
hdpe pipe factory adheres to the factory policy of "credibility,
quality and management as the fundamental goal", with moderate
price, dedicated service, and customer satisfaction as the purpose,
abiding by contracts and keeping promises and famous all over the
country.
FAQ
Q: What is the delivery time?
A: We always have common products in stock and can be shipped
within 30 days.
Large orders require 15 days to complete production.
Q: How to get free samples?
A: Send your address, telephone number, zip code and express
account number to our mailbox, and tell us which model of samples
you need. Our sales team will contact you within 24 hours.
Q: What are your payment terms?
A: Accept the T/T and L/C terms.