Home Companies Wuxi High Mountain Hi-tech Development Co.,Ltd

50 75 110mm HDPE Irrigation Pipes Hot Melt Polyethylene PE Pipes For Water Supply

Contact Us

[China]

Trade Verify

Address: No.1406, Building 3, Calxon Fortune Center, Financial 3rd Street, Jingkai District, Wuxi, P. R. of China

Contact name:Anna qian

Wuxi High Mountain Hi-tech Development Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

50 75 110mm HDPE Irrigation Pipes Hot Melt Polyethylene PE Pipes For Water Supply

Country/Region	china
City & Province	wuxi
Categories	Plastic Products

Product Details

PE Water Supply And Drainage Pipes 50 110 Irrigation PE Hot Melt 75 HDPE Steel Mesh Skeleton Composite Pipe

----------------------------------------

Basic Info.

HDPE drainage pipes are based on high-density polyethylene resin and are collectively referred to as thermoplastic round pipes without internal pressure, which are made by extrusion molding process.

HDPE drainage pipe is a replacement product of traditional steel pipes and PVC drainage pipes. It is mainly responsible for drainage of rainwater, sewage, irrigation and drainage of farmland, etc. It is widely used in roads, railway subgrades, subway projects, waste landfills, tunnels, etc. , Green belts, sports grounds and slope protection caused by high water content in drainage fields, as well as underground irrigation and drainage systems for agriculture and horticulture.

A new type of plastic pipe made of high-density polyethylene material through hot extrusion winding and other special processes can replace steel pipes and polyvinyl chloride pipes in situations where there is no internal pressure.

SDR26		SDR21		SDR17		SDR13.6		SDR11
Pressure 0.6Mpa		Pressure 0.8Mpa		Pressure 1.0Mpa		Pressure 1.25Mpa		Pressure 1.6Mpa
Outer diameter mm	Thick mm	Outer diameter mm	Thick mm	Outer diameter mm	Thick mm	Outer diameter mm	Thick mm	Outer diameter mm	Thick mm
110	4.2	90	4.3	75	4.5	63	4.7	20	2.3
125	4.8	110	5.3	90	5.4	75	5.6	25	2.3
140	5.4	125	6	110	6.6	90	6.7	32	3
160	6.2	140	6.7	125	7.4	110	8.1	40	3.7
180	6.9	160	7.7	140	8.3	125	9.2	50	4.6
200	7.7	180	8.6	160	9.5	140	10.3	63	5.8
225	8.6	200	9.6	180	10.7	160	10.8	75	6.8
250	9.6	225	10.8	200	11.9	180	13.3	90	8.2
280	10.7	250	11.9	225	13.4	200	14.7	110	10
315	12.1	280	13.4	250	14.8	225	16.6	125	11.4
355	13.6	315	15	280	16.6	250	18.4	140	12.7
400	15.3	355	16.9	315	18.7	280	20.6	160	14.6
450	17.2	400	19.1	355	21.1	315	23.2	180	16.4
500	19.1	450	21.5	400	23.7	355	26.1	200	18.2
560	21.4	500	23.9	450	26.7	400	29.4	225	20.5
630	24.1	560	26.7	500	29.7	450	33.1	250	22.7
710	27.2	630	30	560	33.2	500	36.8	280	25.4
800	30.6	710	33.9	630	37.4	560	41.2	315	28.6
900	34.4	800	38.1	710	42.1	630	46.3	355	32.2
1000	38.2	900	42.9	800	47.4	710	52.2	400	36.3
1200	45.9	1000	47.7	900	53.3	800	58.8	450	40.9
		1200	57.2	1000	59.3			500	45.4
								560	50.8
								630	57.3

Advantage

1. Reliable connection: the polyethylene pipe system is connected by electric heating, and the strength of the joint is higher than the strength of the pipe body.

2. Good low-temperature impact resistance: The low-temperature embrittlement temperature of polyethylene is extremely low, and it can be used safely in the temperature range of -60-60℃. During construction in winter, because the material has good impact resistance, the pipe will not be brittle.

3. Good stress crack resistance: HDPE has low notch sensitivity, high shear strength and excellent scratch resistance, and its environmental stress crack resistance is also outstanding.

4. Good chemical corrosion resistance: HDPE pipelines can withstand the corrosion of a variety of chemical media, and the chemical substances in the soil will not cause any degradation to the pipeline. Polyethylene is an electrical insulator, so it will not rot, rust or electrochemical corrosion; in addition, it will not promote the growth of algae, bacteria or fungi.

Details

Application

Municipal engineering water supply system, building indoor water supply system, outdoor buried water supply system and residential area, factory buried water supply system, old pipeline repair, water treatment engineering piping system, industrial water pipes in gardens, irrigation and other fields, etc. Medium-density polyethylene pipes are only suitable for transporting gaseous artificial coal gas, natural gas, and liquefied petroleum gas. Low-density polyethylene pipes are hoses.

Certificate

Company Profile

High Mountain Pipe is a high-tech enterprise integrating R&D, production and sales, specializing in the production of ultra-high molecular weight polyethylene pipes, tunnel escape pipes, steel belt reinforced polyethylene (HDPE) spiral corrugated pipes, HDPE pipes, internal and external plastic-coated composite steel pipes, 3PE anticorrosion A series of multi-specification pipe products such as pipelines, gas station oil pipelines, oil well pipes, MPP power pipes, etc. The company always adheres to the concept of "innovation, efficiency, and integrity", absorbs new ideas, strictly controls quality, follows up all-round services, and insists on making high-quality products. Adhering to the tenet of "pursuing and creating brilliance", we provide solid and reliable guarantee and support for customers' production and operation. Become a reliable partner for the majority of users. Relying on the company's resources, the products are sold all over the country, and exported to Brazil, the Philippines, Australia, the United States, Mexico, South Africa and other countries, and have won unanimous praise from customers! Survive by quality, develop by reputation, we warmly welcome your patronage and sincerely look forward to serving you!