Shanghai Pullner Filtration Technology Co., Ltd. |
Verified Suppliers
|
|
35m³/Hr 5 Micron Size 1 Size 2 Bag Filter Replacement High Flow
Cartridge Filter
General information
PLBG series bag filter pleated high flow filter cartridge is
designed to replace Size 1 and Size 2 bag filters. PP pleated type
provides a cost-effective alternative with higher removal
efficiencies over standard bag media configurations. It’s suitable
for existing bag filter vessels, no need add any hardware change.
Long service life, save filtration cost.
Material Construction
Filter Media | Depth Polypropylene (PP) |
Support/Drainage | Polypropylene (PP) |
Cage/Core/End Cap | Glass Fiber reinforced Polypropylene (PP) |
Performance
Filtration Micron | 1μm, 2μm, 5μm, 10μm, 20μm, 40μm, 70μm, 90μm, |
Maximum Operating Differential Pressure | 3.5bar / 21°C(Inside to Outside) |
Recommend Change-out Differential Pressure | 1.0 bar / 21°C(Inside to Outside) |
Hot Water Sterilization | 77-82℃/30min, |
Maximum Operating Temperature | 82°C |
Flow Rate and Filtration Area
Size | Design Flow Rate (m3/hr) | Max Flow Rate (m3/hr) | Filtration Area (m2) |
1# | 10 | 25 | 1.6 |
2# | 20 | 50 | 3.4 |
Ordering Information
PLBG 0100 01 E
Series | Micron | Length | Seal Material | |||||
0100 | =1.0μm | 2000 | =20μm | 01(1#) | =330mm | E | =EPDM | |
PLBG | 0300 | =3.0μm | 4000 | =40μm | 02(2#) | =660mm | S | =Silicone |
0500 | =5.0μm | 7000 | =70μm | Customization | V | =Viton | ||
1000 | =10μm | 9000 | =90μm |