PVDF Membrane Pleated Filters Microelectronics Filter Low Protein
Absorption Rate
General Description
The PVDF membrane filter cartridge is formed by
Polyvinylenedifluoride (PVDF) membrane media and non-woven support
materials, and has excellent heat resistance and chemical
resistance. The cage, core and end cap are made of polypropylene.
Each part is sealed with thermal welding without any adhesive. The
thermal welding technology, the fusion seal constitutes a complete
whole without any chemical contaminants.
Applications:
Large-scale fermenter air
Intermediate product vessel venting
Autoclave vacuum break
Instrument air
Air and gas service lines
Features
Bigger filtration area guarantees high throughput and long life;
100% integrity test;
Thermal welding, not use any adhesives and surfactants, effectively
reducing the risk of precipitation;
18MΩ pure water flush.
Dimensions
Outer diameter | 2.7" (69mm) |
Length | 10", 20", 30", 40" |
Material of Construction
Model | Membrane Pleated Filter |
Filter Medium | PVDF |
Support/Drainage | Polypropylene |
Center core/Outer Cage/End Caps | Polypropylene |
Seals Material | NBR, Silicone, EPDM, Viton |
Filter Performance
Micron | 0.1um, 0.22um, 0.45um, 0.65um |
Length | 10", 20" |
Interception rate | 100%, 107CFΜ/cm² |
Max. operating temperature | 80℃ |
Max. operating differential pressure | 0.42Mpa at 25℃ |
Max. operating differential pressure (Reverse direction) | 0.21Mpa at 25℃ |
Applicable PH | 1-14 |