Henan Super Machinery Equipment Co.,Ltd |
Verified Suppliers
|
|
1. Applications of induction melting furnace : used for melting stainless
steel, alloy steel, carbon steel.
2. Features of this furnace : fast speed of melting, saving energy, less
burnt loss, pure molten liquid.
3. The aluminum frame of electric is adopted to small capacity smelting
furnace with reasonable structure and small capacity, convenient
installation and simple maintenance, low maintenance cost.
4. The induction coils of fast melting furnace are double paralleled winded with
prolonged coil to make sure the half capacity of furnace molten
liquid can be heated by full load power output which will improve
overall efficiency. Cooling system is equipped along with the
induction coil prolong the lining life.
5. The inner wall of induction coil of large capacity electric furnace is cast with
imported high temperature resistant insulation material to prevent
of furnace lining leakage.
Environment and condition usage for induction
melting furnace
1. Temperature should be at 2℃ to 35℃.
2. The relative humidity no more than 90%
3. Installation height not higher than 1000m
4. No conductive dust and corrosive gas in working place.
5. No explosion and violent vibration room around the place
6. The temperature of the the cooling water should no less than
10℃,not more than 30℃,hardness<8 degree,
Ph<degrees,pressure>0.2Mpa.
7. Power supply must be AC 380V 3-phase 50Hz/60Hz,Voltage
fluctuation 370-410Volts.
Advantages of intermediate frequency induction melting furnace:
Technical parameter of induction melting furnace :
Product name and model | GW-0.25 Medium Frequency Induction Melting Furnace |
Highest temperature | 1650°c |
Temperature accuracy | ±5°c |
Load capacity | 250Kg |
Melting rate | 350Kg/hour |
Medium Frequency power | 250KW |
Melting frequency | 1000Hz |
Power consumption | 0.7KWh/Kg |
Induction coil voltage | 750V |
Water consumption | 6 tons/hour |
Power supply | AC,3-phase,208/380/400/415/440/465V,50/60Hz |
Tilting furnace device | Electric reducer |
Furnace shell structure | Casting aluminum shell |
transformer capacity | 250KVA |
Warranty
· Our products are warranted to be free from defects in materials or workmanship for one year from the date of purchase. Within this period, Across International will, at its sole options, replace any components that fail in normal use. Such replacement will be made at no charge to the customer for parts, provided that the customer shall be responsible for any transportation cost.
· This warranty does not cover consumables and failures due to abuse, misuse, accident or unauthorized alteration or repairs.
· Replacement will be shipped to you after photo or other evidence are provided and investigated