|
[China]
Trade Verify
Address: No.95 Tongbai Road ,Zhengzhou city ,Henan Province ,China
Contact name:Vera Zuo
Henan Super Machinery Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Horizontal Electric Carburize Oven introduction:
The rotary heat treatment furnace is mainly used for normalizing, annealing, cabro-nitriding, and tempering of small round parts such as chain sheets, self-drilling screws. It has following advantages:
1 . Compact structure, small footprint and high productivity;
2 . Uniform heating to improve the quality of heat treatment;
3 . There are a variety of spare pipe joints for various chemical heat treatments;
4 . The furnace body can be tilted and it is convenient to load and discharge.
Carburizing Furnace Features:
1. This furnace is heated by resistance,controlled by solid state
relay and intelligent instrument of Japan conductive company,and
using PID adjusting method,has the advantages of accurate
temperature control,simple operation,stable performance.
2. Working zone uses sealed cylinder-shaped chamber furnace made of
imported high temperature stainless steel,it rotates automatically
after the workpieces are putting into the furnace chamber to make
the workpieces be heated uniformly.It can also be passed into
various gas to meet various technological requirements of
workpieces.
3. The furnace body is supported by a bracket,can tilt upward or
downward under the control of tilt unit,and can discharge
automatically when it's tilting downward.
Technical parameters of SP-RG120-9 Tiltable Roller Retort Carburizing Furnace
| 1. Working power supply | AC/3-phase 4-wire/380-440V/50/60Hz |
| 2. Rated power | 120Kw |
| 3. Rated temperature | 950°C |
| 4. Temperature control way | PID power regulation,instrument of Japan conductive company |
| 5. Temperature accuracy | ±1°C |
| 6. Temperature uniformity | ±5°C |
| 7. Heating element | 0Cr25Al5Fe+Cr resistance wire,spiral |
| 8. Heating element connection | Y |
| 9. Dimensions of Effective work zone | Diameter * length=750*680mm |
| 10. load capacity of 1 batch | 300Kg |
| 11. Operating motor of Furnace chamber | 1 set ,1.5Kw,adjust speed by magnetic |
| 12. Rotating speed | 0.5-8 r/min |
| 13. Tilting motor of furnace body | 0.55KW Hand/electric (all in one) speed reduction unit |
| 14. Max Tilting Angle of furnace body | +/-50 degree |
| 15. No-load power loss | Less than 4KW |
| 16. No-load heating time(Normal Temp:950°C) | About 2.5 hours |
standard model of SUPER carburizing furnace:
| Model | Furnace chamber size | Rated power | Rated temperature | Phase | Rated voltage |
| RG-30-9 | D300×L620 mm | 30 kw | 950 degree celcius | 3 | 380-440V |
| RG-45-9 | D520×L680 mm | 45 kw | 950 degree celcius | 3 | 380-440V |
| RG-60-9 | D600×L750 mm | 60 kw | 950 degree celcius | 3 | 380-440V |
| RG-120-9 | D750×L1000 mm | 120 kw | 950 degree celcius | 3 | 380-440V |
Before sales:
1. Prompt Response (< 12hours).
2. 24 hours technical consultant service
3. Full Support in living and touring in China while customer visiting the factory.
After sales:
1. Prompt Response (< 12hours).
2. One - One customer service with duration over 5 years.
3. Engineers available to service machinery overseas.
