|
[China]
Trade Verify
Address: No.95 Tongbai Road ,Zhengzhou city ,Henan Province ,China
Contact name:Vera Zuo
Henan Super Machinery Equipment Co.,Ltd |
|
Verified Suppliers
|
|
|
Introduction of electric heating furnace:
Pit type gas nitriding furnace is cycle type furnace, apply to
the pole, long axial parts heat treatment. The Wells of the furnace
body is cylindrical, by special crane installed vertically within
the charging heating workpiece. Pit type furnace is usually placed
below the ground plane in the shop, also have placed above the
ground plane, or each half of the under ground plane.
What we can get by this heat treatment furnace :
1) To obtain high surface hardness
2) To increase wear resistance and antigalling properties
3) To improve fatigue life
4) To improve corrosion resistance
5) To obtain a surface that is resistant to the softening effect of
heat at temperatures up to the nitriding temperature.
More about our well type furnace
1. Use for heat treatment in air of steel parts especially the long
pieces .When the process requires, may pass into the protective
atmosphere to reduce oxidation of the workpiece.
2. Two area control ,using intelligent digital display instrument
with silicon controlled temperature control, also have heat
preservation time relay, with the function of over temperature
alarm.
3. The heating element is 0Cr21Al6Nb heating filament.
4. Lining by energy-saving light and aluminum silicate refractory
fiber and diatomite brick.
5. Furnace cover open by leverage.
6. Equipped with heat resistant steel skirts in the middle.
| Gas Nitriding Furnace Well Type High Quality Industrial Oven | |
| Usage | Metal workpiece Nitriding |
| Voltage | AC 380V 50/60Hz 3Phases |
| Chamber Size | Customizable |
| Rated Temperature | 650℃ |
| Temperature Accuracy | ±1℃ |
| Heating Element | 0Cr25Al5 Resistance Wire. |
| Controlling System | 1. 30 programmable segments PID auto control the process of
heating, insulation and cooling. |
| Furnace Chamber | 1. The refractory layer is building by 0.8 density high strength
gather light mullite brick. |
| Furnace Shell, Tank and Basket | 1.Furnace shell: weld by steel material, anti-rust painting. |
| Furnace Cover | 1. Silicon rubber piece &compression bolt sealing, water
cooling for sealing pieces. |
| Nitriding System | 1. Furnace tank: 304 stain steel, 5 mm thickness. |
Warranty
Our warranty period comes from the machine begin to run normally
and we will provide the whole life technology support to you for
free.
All products sold by our company In warranty period,we will provide you the spare parts for free.
Our engineer will help you do the aftersales through our remote
control system.When out of one year warranty time, we will provide
the spare parts with the cost price for the whole machine lifetime.
