33kV 10A Dry-Type Air Core Reactor,Current Limiting Reactors
1.Overview of 33kV 10A Dry-Type Air Core Reactor,Current
Limiting Reactors
The Dry Tpe Air Core Series Reactors made By the us have got The
multilayer winding shunt structure.every layer windingis
Shunt winded by the small bore aluminum lead and every layer’s
leading-out are jointed on the two layer aluminum ally bus-bars.the
whole reactor is enveloped by high temp solidified exopy fiberglass
with the method of natural air cooling. The product is coated with
the anti-aging,anti-UV,antifouling and hydrophobic dope. This type
reactor has got the advantages of low-loss,high security.low-noise
and convenient installation and maintenance. The product’s
operation life reaches a length of thirty years.
2. Main features of 33kV 10A Dry-Type Air Core Reactor,Current Limiting Reactors
- The reactor is enclosed by epoxy resin impregnated long glass
fiber.The reactor is composed of several enclosures of coils.
- The coil is insulated by polyester film ,which has good capability
of insulation.
- The reactor is painted with resisit aging ,ultraviolet-proof
insulation coatings,and has fine performance operating outdoors.
- In the shunt compensation capacitor device,it is used in series with the shunt capacitor bank to suppress
harmonic amplification,reduce system voltage distortion, and limit the closing inrush
current when the capacitor bank is switched.
3.Executive standard of 33kV 10A Dry-Type Air Core Reactor,Current Limiting Reactors
GB1094.6-2011,JB/T5346,JB/T10775
5. Conditions of use
- The altitude does not exceed 2000m.
- Ambient temperature -25~+45°C, relative humidity not exceeding 90%.
- The waveform of the supply voltage is similar to a sine wave.
- There are no harmful gases around, no flammable or explosive
materials.
- The surrounding environment should have good ventilation
conditions. If it is installed in the cabinet, ventilation
equipment should be installed.