Shenzhen Herolaser Equipment Co., Ltd. |
Verified Suppliers
|
|
Product Description
20W 30W 50W 1064nm Focus Lens for Engraving Machine with Raycus
Laser
Overview:
The fiber laser marking machine adopts an integrated overall
structure, which has no optical pollution and small power coupling
loss. It has unique advantages in the application of laser marking.
Features:
1. High beam quality: using German IPG and British SPI advanced
fiber lasers, the beam quality is better than the traditional
solid-state laser marking machine, the focusing spot diameter is
less than 20um, and the divergence angle is 1/4 of the
semiconductor pump laser, which is suitable for precision and fine
marking;
2. Low cost: the electro-optical conversion efficiency is up to 30%, and the power consumption of the whole machine is less than 500, which is 1/10 of that of the lamp pumped solid-state laser marking machine, greatly saving energy consumption;
3. Long service life of laser: fiber laser marking machine uses laser diode as pump source, and its average working time can reach 100000 hours
4. Maintenance free operation: the laser does not need any maintenance, nor does it need to adjust or clean the lens
Application areas:
Any metal, engineering plastics, electroplating materials, coating
materials, spraying materials, plastic rubber, epoxy resin,
ceramics, etc
Main technical parameters:
Model | ML-MF-TY-02-HW50 |
Laser wavelength | 1064nm |
Frequency range | 10-400kHz |
Minimum focus spot diameter (linewidth) | 0.015mm |
Marking speed | ≤7000mm |
Repeatability | ±0.002mm |
Minimum character | 0.25mm |
Beam diameter | 8MM |
Marking range | 110x110mm(Optional with others) |
Cooling mode | Air cooling |
Power supply | AC220V/50Hz |
Sample pictures are as follow: