200 Watt Mould Repairing Laser Welding Machine with Crane Arm
Simple to Maintain
Introduction of machine:
The solder joint diameter is only 0.1-3.0mm, with high precision
and precision;
The YAG laser has a wavelength of 1064nm and is less harmful to
human skin than other lasers
Small heating range, to ensure that the workpiece is not
deformation, no foaming
It makes up for the shortcomings of traditional argon arc welding
and cold welding in repairing fine surface. Low oxidation effect,
workpiece color change freely;
Welding operations can be performed in small Spaces or deep space
without damage to the surrounding walls. There are no deformations
in the mold and no dents around the weld pool.
Edges will not burn when repairing details.
Argon protection, to ensure that the repair parts and the substrate
does not burn, oxidation.
Joystick control, moving workpiece, assembly, curve;
Microscope monitoring operation to ensure good vision of fine
parts;
Imported welding wire, with a variety of imported mold materials,
can achieve polishing and modeling.
In material, manpower, time and other aspects can greatly save the
processing cost.
Advantages and features:
It has flexible angle and position adjustment ability in ten
directions. Control pole controls the motor in laser head with
stepless speed regulation. It is suitable for making patch welding
on all molds at any angle or any position.
For large size mold, there is no need worktable, just directly
conduct mold welding on the ground or at forklift truck.
It adopted British ceramic condenser cavity, it has high
reflectivity and extremely long service life.
At the same time, it is equipped with precision worktable using
electric lift, making small mold welding, it is also convenient and
flexible.
Product parameters:
Model | ML-WY-M02 |
Average laser power | 200W |
Max laser power | 200W |
Max energy of single pulse | 75J |
Laser wavelength | 1064nm |
Pulse width | 0-20ms |
Laser welding frequency | 0.5 -100HZ |
Spot size range | 0.2-2mm |
Welding wire | 0.1-0.8mm |
Power Supply | 220VAC ± 10% / 50-60HZ |
Power Consumption | 6000w |
Water pressure protection | ≤ 0.025MPa |
Cooling water temperature | ≤ 35 degrees |
Temperature protection | 40 degrees |
Cooling water flow | 10L/min |
Dimensional | 1400mm x 1400mm x 1500mm |
Weight | 340 kg |
Cooling Way | Water cooling |
Laser Type | Pulse |
Applied area and materials:
Repair cracks, collapsed horn, touched edge and damaged sealing
side, welding on horniness material (~HRC60). This machine’s arm
could be move up and down, front and backwards, left and right
side.
Samples for reference:
FAQ
1. How is the payment?
- 30% deposit before production and the balance 70% before shipment
2. How is the delivery and shipment?
- Ship in 7 days after 100% payment;
- Plywood box packaging
3. How will you guarantee aftersales services?
- We offer two warranty for laser source, one year for whole machine
and lifetime maintenance services.
- Engineers available to service machinery overseas
- Free technical training in our factory
- Free sample can be sent to you
- Professional technical team 24 hours online
4. How about your presales service?
- Speeding offer within 8 hours quick response and free consulting.
- Free sample welding or testing is available
- Progressing solution design to all clients, including distributors
and end users.
![](http://img.everychina.com/nimg/6b/e2/c60d611b2ef766a2cb03afb8783c.jpg)