Air Cooled AC 220V 355nm UV Laser Engraver With High Beam Quality

Small Light Spot UV Laser Marking Machine with High Beam Quality

Product introduction:

This UV laser machine is a general purpose solution for a range of industries. Medical device manufacturers use our UV or "cold label" solutions to create the smooth, hygienic markings required by the FDA, including unique device identification markings. In the electronics and automotive industries, ultraviolet lasers allow companies to mark small, delicate components, including circuit boards and silicon wafers, reducing waste.

UV laser marking machine uses 355 nm UV laser wavelength. These UV wavelengths provide some of the highest absorption rates, minimizing the thermal pressures that can cause product damage.

Features:

1. The use of venous frequency doubling technology, greatly improve the stability of the laser. A series of optimization methods are used to design the laser cavity, so as to ensure the quality of the beam as the basic mode.
2. The machine takes a 355nm pumped purple laser as the light source. The narrower pulse width and smaller thermal impact help to generate peak power. The higher the peak power, the wider the range of material adaptability. This tool works well for printing relatively hard materials.
3. The pulse stability is high, that is, the laser pulse consistency is good, the engraving effect is the same, very suitable for precision marking. High pulse repetition frequency meets the requirements of fast marking and high production efficiency.
4. High photoelectric conversion efficiency and long service life.
5. Automatic on the rotary table (optional items), convenient feeding, high speed, high efficiency.
6. The logo is environmentally friendly and in line with RoHS standards.
7. Support AutoCAD, PLT, BMF, AI, JPG and other DXF format LOGO and graphic design.
8. Can automatically mark the date, bar code, two-dimensional code.
9. Excellent performance, good stability, high conversion rate, low energy consumption.

Technical details:

Application:

• UV laser marking area will not produce thermal effect, will not cause material scorching problem
• UV laser is suitable for processing almost all materials except copper materials.
• Fast speed, high efficiency, small spot, high beam quality
• Applicable to the high-end market, electronic components, drugs, cosmetics and other polymer materials, packaging bottle surface, glass, crystal internal standard ultrafine processing

Marking samples for reference:

• 30% deposit before production and the balance 70% before shipment

• Ship in 7 days after 100% payment;
• Plywood box packaging