Shenzhen Herolaser Equipment Co., Ltd. |
Verified Suppliers
|
|
Fiber Laser Rust Removal Machine 200W Removal Resin Noncontact Cleaning
laser cleaning machine can remove resin,oil,stain,contaminant,rust,coating,plating,paint etc,.Laser cleaning is a new technology based on the interaction effect between laser and matter.Unlike traditional mechanical cleaning,chemical cleaning and ultrasonic cleaning it does not require any CFC that destroys the ozone layer Organic solvents,no pollution,no noise,harmless to the human body and the environment,it is a "green"cleaning technology.
Description of high efficiency laser cleaning machine | ||
Model | ML-MF-200l-LC | |
Laser power | 200W | |
Laser source type | IPG fiber laser source | |
Laser wavelength | 1064 nm | |
Cooling method | Water cooling | |
Cooling water | Deionized water | |
Water temperature | 18-22 ℃ | |
Cabinet size | 1420mm*850mm*1370mm (L*W*H) | |
Total weight(with water tank) | 225kg | |
Maximum power | 2000W | |
Focal depth | 10mm | |
Scan width | 10-60 mm | |
Auxiliary gas | Compressed air/Nitrogen | |
Air pressure | 0.5-0.8 MPa | |
Optional accessory | Handheld / Manipulator | |
Working condition | 5-40 ℃ |
Application | |||
Rust Removal | Oxide Removal | Molding Cleaning | Surface Preparation |
Paint Removal | Surface Cleaning | Stain Removal | Surface Roughening |
Tool Cleaning | Historic Restoration | Selective Paint Removal | Precise Cleaning |
Five categories in conventional cleaning process:
(1)
Mechanical cleaning process, which cleans the surface by physical
smearing, scrubbing, and
brushing. However this ineffective cleaning method can easily
damages the surface of the
substrate.
(2)
Chemical etching process, which removes the surface contaminant by
spraying or vibrating
through organic cleaning solvent. However dirty areas with multiple
material compositions
are difficult to remove and need multiple times of procedures
through this environmental
unfriendly cleaning process.
(3)
Sand-blasting cleaning process can cause serve dust pollutions
during the process, which
can harm operator’s personal health.
(4)
Ultrasonic cleaning process is based on the ultrasonic vibration
phenomenon that can
effectively clean the surface of materials. However materials with
large geometry size or
complex shape structure are unable to be cleaned in this method,
also the surface can be
easily oxidised after ultrasonic cleaning process.
(5)
Dry-ice cleaning process is a high-running cost cleaning process.
It has some drawbacks –
storage of dry-ice and collection of the contaminant after the
process.