Customized Waterproof PVC Clear Roof Marquee Tent 15x20 For Commercial Events

Customized PVC Clear Roof Marquee Tent 15x20 For Commercial Events

Customized Aluminum Alloy Large Luxury Waterproof Clear Wedding Marquee Tent

>>>>>Product descrption<<<<<

    These Clear wedding marquee are using a strong aluminum alloy frame and easy to set up and dismantle as well as convenient to stock and transport. All our tents are well manufactured by our qualified manufacturing department.

   This kind of Clear wedding marquee is widely used as a wedding tent, event tent, warehouse tent, exhibition tent, party tent, catering tent, and so on.

   The A Frame Clear Span Wedding Marquee Tent is our standard and most popular design in the past few years.

>>>>>About the tent<<<<<

Frame material:

Hard pressed extruded aluminum alloy, anodized surface handling, silver color, sturdy and never rust; over 15~20years life span.

Our aluminum alloy code 6061/T6, hardness achieved 15HW. The wind load capability is based on the aluminum hardness

Fabric cover:

High quality double PVC-coated polyester textile, 100% waterproof, flame retardant to DIN4102 B1, M2, CFM, UV resistant, tear resistant, self-cleaning ability, etc.

Our PVC fabric flame retardant according to German standard DIN4102 B1, M2 and USA standard CFM/NFPA 701.

Product features:

1, Can be constructed for temporary or permanent

2, Modular system able to flexibly extend and move

3, With fire protection, self cleaning, anti wind and snow

4, There is no pole inside the tent, which enables you to make maximum use of the space inside

    The span width of our Clear wedding marquee are from 3m to 60m( 5M, 10M, 15M , 20M ,25M 30M, 35M, 40M, 45M, 50M, 60M) and the length has no limitation. Length can be any times of 3m, 5m modular.

Structural system   The main material is aluminum alloy profile GB6061-T6 / AL6082-T6. The support between the columns is reinforced with diagonal steel tubes. The length distance between the columns can be divided into 5 meters or 3 meters indefinitely.   The overall structure has passed the wind test of a professional institution. The maximum allowable wind speed is DIN EN 13782: 102 km / h (0.50kN / m).

Installation Methods:

1) Concrete ground: use the expandable bolts. (Free of charges);

2) Tarmac ground or grass ground or sand ground or other soft grounds: use the steel anchors;

3) Marble or tile ground or other kind indestructible grounds: use the weight plates

1. Can you print our logos on the tent?

Yes. Customized logos can be printed on the tent fabric according to your requirements.

2. Does your tent be able to install repeatedlly?

Our tents can be assembled and dismantled and repeatedlly with small transporation distance. The lifespan of aluminum framework can reach 15-20years, and 5-8 years for PVC fabrics depending on different conditions of usage.

3. What documents are available?

  A full range documents drawings,packing lists, installations manual and relatives certificates can be provided.Customs declaration is provided. We provided one-stop service for you.