Diagon 3 Part Clinical Diagnostic Reagents Disposable Recycling With Blood Sample

Diagon 3 Part Clinical Diagnostic Reagents Disponsable With Blood Sample CBCAnalyzer Reagent

Specification of Diagon reagents

I. Does CBC analyzer reagents need to recalibrate and control when using our reagents to replace original one?

Do not need to do calibration again, and do quality control as before.

II. Can CBC analyzer reagents cross use with different manufactures?

Some reagents can cross use but some need to use as a set otherwise the results may be effected. For example, LYSE-4DL, LYSE-4DS,NR-PACK and RET-PACK of SYSMEX XE-2100 model should be used as a set.

III. PRECAUTIONS

1. Re-calibration is recommended when changing the origin of the reagents.

2. It is not recommended using different brands of solutions together on one unit of analyzer.

3. Do not ingest. Avoid contact with skin and eyes.

4. Skin contact: Flush with plenty of water.

5. Eyes contact: Flush with plenty of water. Obtain immediate medical attention.

6. This kit is for professionals and in vitro diagnostic use only.

7. Never put distilled water on the analyzer (except clean for shipping menu), otherwise the pneumatic unit can be damaged seriously.

8. Store the product at 2-35℃ in a dust free place with good ventilation. Temperature outside the range 9. may damage the product.

The open vial life of the product is 60 days. Unused reagents should be discarded after 60 days. Do not mix residual with a new carton.