|
[China]
Trade Verify
Address: Building 21, 600 Tongjiang Middle Road Changzhou ,Jiangsu ,China
Contact name:Lisa
Changzhou Longchuang Insulating Material Co., Ltd. |
|
Verified Suppliers
|
|
|
1/8 3.2mm Red Flexible, Thick Adhesive-Lined Dual Wall Heat Shrink Tubing
Flexible, Thick Adhesive-Lined Dual Wall Heat-ShrinkTubing is manufactured by co-extrusion of polyolefin and hot-melt adhesive. Designed to provide both insulation and sealing for protected articles, Used to protect bundles wires and metal tubes against water and moisture.
Features
Low longitudinal shrinkage
Thick adhesive liner bonding to a wide variety of plastics
ubber and metals forms an effective barrier against fluids
Flexible
Continuous operating temperature:-45°C-125°C
Min shrinktemperature:110°C
Shrink ratio: 3:1
Dimensions
| Inch | mm | Internal Diameter mm | Internal Diameter mm | Total Wall Thickness mm | Adhesive Thickness mm | Spool Length M/spool |
| 1/8 | 3.2 | 3.2 | 1.0 | 0.90±0.30 | 0.45±0.20 | 200 |
| 3/16 | 4.8 | 4.8 | 1.6 | 1.20±0.30 | 0.55±0.20 | 100 |
| 1/4 | 6.4 | 6.4 | 2.2 | 1.25±0.30 | 0.55±0.20 | 100 |
| 5/16 | 7.9 | 7.9 | 2.7 | 1.35±0.30 | 0.65±0.20 | 100 |
| 3/8 | 9.5 | 9.5 | 3.2 | 1.35±0.30 | 0.65±0.20 | 50 |
| 1/2 | 12.7 | 12.7 | 4.2 | 1.55±0.40 | 0.75±0.20 | 1.22OR25M/Roll |
| 5/8 | 15.0 | 15.0 | 5.2 | 1.65±0.40 | 0.75±0.20 | 1.22OR25M/Roll |
| 3/4 | 19.1 | 19.1 | 6.3 | 1.90±0.40 | 0.85±0.20 | 1.22OR25M/Roll |
| 1 | 25.4 | 25.4 | 8.5 | 2.00±0.40 | 0.90±0.20 | 1.22OR25M/Roll |
| 5/4 | 30.0 | 30.0 | 10.2 | 2.05±0.40 | 0.90±0.20 | 1.22OR25M/R0II |
| 1-1/2 | 38.1 | 38.1 | 13.5 | 2.35±0.40 | 1.05±0.20 | 1.22OR25M/R0II |
Technical Data
| I Property | Test Method | Standard | Typical Performance I |
| Tensile Strength(MPa) | ASTM D2671 | >10.4 | 11 |
| Elongation(%) | ASTM D2671 | >300 | 450 |
| Tensile Strength after aging (MPa) | UI224 158°CX168hr | N7.3 | 8.5 |
| Elongation after aging(%) | UI224 158°CX168hr | N200 | 350 |
| Dieletric strength(kV/mm) | IEC 60243 | 315 | 17.5 |
| Volume resistivity(n.cm) | IEC 60093 | >1X1014 | 2.5X1014 |
Adhesive
| Property | Test Method | Standard I |
| Water Absorption | ASTM D570 | v0.2% |
| Sofening Point(°C) | ASTM E28 | 90±5 |
| Strength of pearing(PE) | ASTM D 1000 | 120N/25mm |
| Strength of pearing(AL) | ASTM D 1000 | 80N/25mm |
