25KW 80KHZ Brazing Induction Heater For Saw Blade Alloy Segments

25KW 80KHZ Saw Blade Alloy Segments Induction Brazing Machine For Brazing

WHAT IS INDUCTION BRAZING :
 
Induction Brazing is a method of joining two pieces of metal together with a third, molten filler metal. The joint area is heated above the melting point of the filler metal but below the melting point of the metals being joined; the molten filler metal flows into the gap between the other two metal pieces by capillary action and forms a strong metallurgical bond as it cools. Of all the methods available for metal joining, brazing may be the most versatile. Brazed joints have great tensile strength – they are often stronger than the two metals being bonded together.
 

 
Six Protection:

• Overcurrent Protection               
•  Water shortage Protection
• Overheating Protection               
•  Overvltage Protection
• Short circuit Protection                 
• Phase Protection

 

Induction Brazing Machine GY-25AB Parameter:

 
 

The advantages of the Induction Brazing Machine.
 
1. High welding accuracy and remarkable energy saving effect
2. The welding process is easier to inspect and adjust the heat, which reduces the risk of overheating and reduces the failure rate
3. The heat of induction brazing is generated in the matrix of the material, which will reduce the risk of cold brazing.
4. No burning gas consumption, no more heat radiation, more environmentally friendly and safer.
5. The sensor uses internal cold water for cooling. Therefore, it protects personnel during the long heating process and avoids the operator from scalding.
6. Local heating, fast heating speed. Therefore, it will not affect the surrounding components, and there is no need to install heat insulation.
7. It can be set and programmed, and the degree of automation is higher.
8. Diversification of welding materials.

It mainly aims to melt the solder by heating it to a certain temperature for the purpose of connecting two types of metals of the same material or different materials.
 
1) Welding of various hardware cutting tools, such as diamond tool, abrasive tool, drilling tool, alloy saw blade, hard alloy cutter, milling cutter, reamer, planning tool and solid center bit.
 
2) Welding of various hardware mechanical gadget: Silver soldering and brazing of metals of the same variety or different varieties, such as hardware toilet and kitchen products, refrigerating copper fitting, lamp decoration fitting, precision mold fitting, hardware handle, eggbeater, alloy steel and steel, steel and copper as well as copper and copper.
 
3) Compound pot bottom welding is mainly applicable to the braze welding of circular, square as well as other irregular plain pot bottom. It is also applicable to plain braze welding of other metals.
 
4) Welding of heating disc of electric hot-water kettle mainly refers to the braze welding of stainless steel flat base, aluminum sheet and tubular electric heating elements of various forms.

 

We have established an R&D system. It is supported by advanced engineers and professional workers, who are especially engaged in researching and developing the machinery of middle or high frequency induction heating and high frequency inverter electrolysis and galvanization power supply. Since we owned strong technique development capability, our factory has been insisting on producing new product and new craftwork to assure our leading position on technique in this field.

Under the effort of several years, our factory has produced series of high quality products in various categories. We can also exclusively produce these products on your requirement to meet you need. Our middle or high frequency induction heating equipment is produced for special voltage condition of some countries. For instance, there is single-phase 110V, three-phase 220V induction heating equipment for America and Japan and three-phase 415V, 440V induction heating equipment for such southwestern Asia countries as Malay and Thailand.