Home Companies Nanjing Saiko Controls Co.Ltd

Heating / Cooling Touch Screen Room Thermostat NTC Sensor Black Color

Active Member

Contact Us

[China]

Address: No.40 Ailing Road, Moling Street, Jiangning District, Nanjing

Contact name:James Zhang

Nanjing Saiko Controls Co.Ltd

Heating / Cooling Touch Screen Room Thermostat NTC Sensor Black Color

Country/Region china
City & Province nanjing jiangsu
Categories Other Home Audio & Video Equipment

Product Details

New Style Black Touch Screen Digital Room Thermostat

 

The SK300 Thermostat is touch screen thermostat with black back light. It is applied to temperature control of industrial, commercial and domestic room, and start of control AC appliances.

 

Technical Data

 

Set TEMP range5-35 ℃Power supply220VAC±10%,50/60Hz
Accuracy±1℃Rated currentMax resistive current 3A
Sensor TypeNTC sensorPower consumption<2W
Ambient Condition-5-55 ℃Operating Humidity5~90%RH (no condensing)
ColorBlackProtection ClassIP20
Housing MaterialPC+ABS Flame Retardant plasticsDimension ( W × H × D )86*86*14mm
CertificateCE & ISO9001Hole pitch60mm (standard)

 

To turn the thermostat on/off

1. The power on and off of the thermostat can be realized through manual operation.

The power on/off condition can be switched through press on/off button.

2. The primary power up of the system is under the power off condition.

 

To adjust thermostat temperature

1. Press △ or ▽ to adjust the temperature, the flashing default temperature is 20℃;

2. Press △ to increase temperature by 1℃;

3. Press ▽ to decrease temperature by 1℃;

4. The system will exit automatically without any operation in 5 seconds.

 

Temperature calibration

When the thermostat is in stand by state, press “” for 3 seconds, while display “XX” ℃ (RT symbol doesn’t show), press “up” or “down” key to adjust the temperature to the correct value, it will accept automatically in 5 seconds.

 

Heating/Cooling setting

Press “M” key to select heating or cooling mode.

 

Fan speed setting

With each press of the “fan speed key”, the thermostat will change the speed among low, medium, high and auto speed. In Auto” mode, the speed automatically change according to the difference between room temp. and set temp.

 

To set timer

When the thermostat is turned on, press “” until the time start flashing, using the up or down key to set the desired time. It will accept automatically in 5 seconds. The thermostat is now set to be turned on/off at the desired time.

 

Writing diagram

 

 

Hot Products

Introduction The SK90 is used for 2-position control with on/off output for the control the ...
Touch Screen Digital LCD Programmable Floor Heating Thermostat Weekly circulation digital programmin...
Introduction The SK90 is used for 2-position control with on/off output for the control the ...
16A Weekly Programmable Touch Screen Floor Heating Digital Thermostat With Anti-flammable PC ...
Introduction The SK90 is used for 2-position control with on/off output for the control the ...
Electric Heated Programmable Floor Thermostat with Remote SK309 thermostat is to control floor ...