PCB 1.0mm Pitch Pin Header Connectors Through Hole Waterproof
- Shenzhen Soulin Electronics Technology Co., Ltd. is a high-tech
enterprise which specializes in the tmanufacturing and marketing of pin header,female header ,sata cable
,avation connector , SATA connectors, USD3.0 ,HDMI , cable. Since the establishment of the
company, we have been and remain committed to becoming the industry
leader for connectors .
- Pin Header, a type of connector.
- This connector is widely used in electronic, electrical, instrument
in the PCB circuit board, its role is in the circuit is blocked or
isolated between the circuit, play a bridge function, take up the
task of current or signal transmission.It is usually used with the
busbar to form a board-to-board connection.Or matching with the
electronic wiring harness terminal, forming a board-to-wire
connection;Can also be used independently for board to board
connection.
- Because the specifications required by different products are not
the same, there are also a variety of pin specifications, according
to the standard classification of pin connectors in the electronics
industry:
- According to the spacing can be roughly divided into 2.54mm,
2.00mm, 1.27mm, 1.00mm, 0.8mm five categories according to the
number of rows have a single row of needles, double row of needles,
three rows of needles;According to the packaging rules with
SMT(horizontal paste/vertical paste), plug-in DIP(direct
insert/bend insert);According to the installation mode, 180° is
represented by S, 90° by W, and SMT by T.
- Number of rows: single row, double row, three row, four row at
most.
- Pin number: 02 to80
- Stitching: straight foot, bent foot, SMT;The size of the needle.
- Dimensions: overall dimensions length, width, thickness, row
spacing.
- Spacing: 0.8, 1.0, 1.27, 2.0, 2.54.
- Material: refers to contact material and surface treatment,
insulation material.
- Packing: blister shell, roll bag, bulk.
- Material: Pin material: brass or phosphor bronze;Insulation
material: plastic UL94V-0.
- Surface treatment: gold plated 0.8U, tin plating, nickel plating.
- Processing technology: Row needle processing process is mainly:
according to the requirements of brass (or phosphor bronze)
processing pin,
- And according to the requirements of nickel plating and then gold,
and then use a mold to process the insulation part, and finally in
special equipment according to the ruler
- The pin is required to be inserted into the insulator.
