Signal output line -ADPROV2.0 002 black pcb molded wire harness
custom cable
- As people's requirements for comfort, economy and safety continue
to improve, the variety of electronic products in cars is also
increasing, and the failure rate of automotive wiring harnesses is
becoming more and more complex harnesses are also increasing
accordingly. This requires an increase in the reliability and
durability of the wiring harness and other performance, many people
are more interested in the process and production of automotive
wiring harness, here on the automotive wiring harness process and
production of this knowledge to do a brief description, you just
need to spend a few minutes reading, you can generally understand.
- After the two-dimensional product drawings in the automotive wiring
harness, to arrange the production process of the harness, the
process is to serve the production of the two inseparable, so I
will be the production of automotive wiring harness and the process
of the two combined together to analyse.
- The first station in the production of wire harnesses is the open
wire process. The accuracy of the open wire process is directly
related to the entire production schedule, once the error is made,
especially the open wire size is short, it will lead to rework of
all stations, which is time consuming and affects production
efficiency. So in the preparation of the open wire process is to be
based on the requirements of the drawings to determine the
reasonable size of the wire open wire, stripping head size.
- The second station after the opening line is the crimping process,
according to the drawing requirements of the terminal type to
determine the crimping parameters, the production of crimping
operation instructions, for special requirements need to be
specified in the process documents and training operators. For
example: some wires need to go through the sheath before crimping,
it needs to be pre-assembled wire and then return from the
pre-assembly station before crimping; there is a piercing crimp
using special crimping tools, this crimping method has good
electrical contact properties.Next is the pre-assembly process,
first of all to prepare the pre-assembly process operating
instructions, in order to improve the overall efficiency, complex
wire harnesses are set up pre-assembly stations, pre-assembly
process is reasonable or not directly affect the efficiency of the
total assembly also reflects the technical level of a craft
personnel. If the pre-assembly part of the assembly of less or
assembly of the wire path is unreasonable will increase the
workload of the total assembly personnel, slowing down the speed of
the assembly line, so the process personnel should often stay on
site to constantly summarise.
- The final step is the assembly process. According to the product
development department's design of the assembly table, the design
of the assembly equipment, material box specifications and the size
of all the assembly sheaths and accessories numbered on the
material box to improve the efficiency of the assembly. Prepare the
assembly content and requirements for each workstation and balance
the entire assembly workstation to prevent too much work at one
point and pulling down the speed of the entire assembly line. To
achieve a balanced workstation, the process personnel must be
familiar with each operation and measure the working hours on site
to adjust the assembly process at any time.
Color | white/ black or Customized | Lengh | Customized | Compatible | for car | Free Sample | YES | Package | Bag packing,Tube packing,Tape&Reel packing | Samples | Provided | Confirmation | Drawing will be provided before production |
|
|
![](http://img.everychina.com/nimg/6f/0b/095a17ece7783ae75b6e2d709877.jpg)
![](http://img.everychina.com/nimg/10/14/bd9a9565d88676c37503cad1db48.jpg)
![](http://img.everychina.com/nimg/2e/18/a1d24be2487b88f8e3a660349ac7.jpg)
![](http://img.everychina.com/nimg/c8/05/a057ce80bb9cb3e459407e94209b.jpg)