Plastic Straight H3.0 Round Pin Header Connector 1.778mm Pitch

Plastic Straight H3.0 Round Pin Header Connector 1.778mm Pitch

• High temperature resistant insulating plastic (UL94V-0) material: PBT(only meet the wave soldering process).

  High temperature resistant insulating plastic (UL94V-0) material: PA6T, PA9T, LCP(can meet the wave soldering, reflow welding two kinds of process).

  The color of insulating plastic can be divided into black, white, blue, natural color and so on.

  Hardware contact terminal material: brass (C2680) or phosphor copper (C5191), leather copper.

  Hardware contact terminal surface treatment: nickel plating first in gold or silver plating, bright tin plating, wuxi plating, semi-gold tin plating, etc.

  Bags, boxes, tubes, reels (braided).

  First according to the requirements of injection molding insulating plastic and stamping good metal contact terminal, and according to the requirements of metal contact terminal nickel plated or plated silver, bright tin, tin plating, tin plating, tin plating

  Finally, assemble the metal contact terminals on the insulating plastic according to the size requirements of special equipment.

  There are many factors affecting the price, usually the biggest influence for gold plating, terminal structure, etc.

• Busbar is widely used in vehicle-mounted monitoring, instrumentation, Internet of things, new energy vehicles, LED display field, POS machine and scanner, lighting industry, security industry, electronic toys, household appliances, etc., providing the most reliable connection board to board and wire to board.

  The spacing can be roughly divided into 0.8mm, 1.00mm, 1.27mm, 1.5mm, 2.00mm, 2.2mm, 2.54mm, 3.0mm, 3.5mm, 3.08mm, 5.08mm

  The number of rows can be roughly divided into: single row, double row, three row, four row, etc.;

  The height can be roughly: H2.0, H2.2, H2.8, H3.4, H3.5 H4.3, H4.6, H4.9, H5.0, H5.7, H6.35, H7.1, H7.2, H8.5, H10.0, H11.0, etc."

  SMT(horizontal paste/vertical paste), plug-in DIP(straight insert/bend insert), splint, etc. (According to the installation method :180 degrees by S, 90 degrees by R, SMT by T)