3A Long Latch Circuit Board Header Connector 10 Pin Vertical Trough Hole

3A Long Latch Circuit Board Header Connector 10 Pin Vertical Trough Hole

 
Description
1. Ejector header connector is one of many connector types.
2. It is not only a European type connector, but also a variety of connector classified according to the actual use. Because its shape is similar to horns, it is called ejector header connector. Ejector header connector is a very simple internal wiring equipment.
 
How to use Shrouded header connector
Ejector header connector usually needs to pay attention to the insertion direction, perpendicular to the insertion direction and inclination.
1. Insertion direction: when the connector is fully inserted to u = 14.2, the specified contact resistance shall be ensured.
2. Perpendicular to the insertion direction: if the printed board or fixed board mounted connector is floating mounted, the design of free and fixed board mounted connector shall provide at least 1mm adjustable displacement.
3. Inclination: the design of free and fixed plate mounted connectors allows inclination error, which is ± 4 ° in longitudinal direction and ± 4 ° in transverse direction.
 

 

Category

1. According to the spacing: 1.0mm, 1.27mm, 2.0mm, 2.54mm.

2. No. of pins: 2~80 pins.

3. Installation mode: straight, right angle, SMT.

4. According to the installation mode of layout, it is mainly divided into 180 degrees, 90 degrees, SMT(vertical mount SMT, horizontal SMT and right angle SMT);

FAQ
Q: Can I get some samples?
A: Yes,some samples are free.
 
Q. which payment can be accepted:
A: 1. The payment terms can be flexiable depend on the quantity and products.
2. Usually, new customer we prefer the 100% T/T before shipping or 30%T/T advance before shipping.
 
Q: Are you manufacture of trading company?
A: We are a manufacture in Shenzhen, China.
 
Q: What’s the delivery time?
A: It usually takes about 3~7 working days to produce the products.