Waste Scrap Wire Stripping Machine , Copper Cable Stripping Machine 2.2kW

scrap wire peeling machines waste wire stripping machine/cable stripper machine

Specifications

1. wire diameter range:1-50mm 2. Power:2.2kw 3. High quality wire stripping machine 4. CE certificate

Automatic scrap copper wire cable cutting stripping machine

Functions:

The wire cable stripper machine is suitable for all kinds of electric wire, copper wire, aluminum wire, steel wire, etc. Widely used wire stripping machine.

Wire stripping range:1~50mm

Specification:

Item Name: Wire/cable stripping machine
Model No.: 918-KOF
Wire diameter range:1~50mm

Output:600-1200kg / Day

Voltage:220/380V
Power: 2.2kW
Measurement:700×610×840mm

Weight: 110kg
Warranty: 1 year

Features:

1. Can strip the flat wires
2. Stable performance
3. Convenient and easy to operate
4. Practically and efficiently
5. Widely used

This machine is easy to operate and convenient to carry, can process single core copper wire, twin cores copper wire.

Operation
1. Comparing the wires’diameters with the feeding holes on the machine, feeding the wires one piece at one time. Before feeding the wires, please cut off the head of the wires, to avoid gaps caused to the blades.

2. On the output side, if the cuts on the wires are too deep, please check below points:
* Please adjust the handles on the input side, screw down or loose them. (M12 handles)
* Check whether the wires on the right position as you feeding them.
* Make sure the blades are sharp, if not, polish them with the oil stone.

3. On the output side, if see the plastic(PVC)has been stripped, but the copper wires can not been disgorged, please check below 4 points:
* Polish the axis of the upside with the oil stone.
* Check whether the springs are loose,if yes, screw down to make them tighten.
* The diameter of the wires are too small, please adjust the space between the two axises to 0.3-0.6mm.
* If the wires you want to strip are hot, also can not get the copper wires stripped out.

4. If the wires were blocked in the axises, please check below points:
* If the springs on the press wheels are too tight, loose them.
* There are too much oil on the cables/wires, please wipe it.

5. If see the blades tilted:
* Check whether the center adjuster was loosed.
* Centering adjustment and adjust the screws of two sides of it.

Note
Make sure the wires’diameter are similar with the feeding holes,large wires in large feeding holes,small wires in small feeding holes, flat wires in flat feeding holes.
Features

11 holes and 10 blades for easy access to any kind of cable or wire from the smallest to the largest
The professional device works even where conventional grip procedures fail
11 different guides guarantee the machining of all types of cable with variable diameter from 1 mm to 40 mm
Do not waste time with other models of slotting machines where you need to adjust the blade every time you change the diameter of the cable
This machine automatically adjusts itself
Among these guides we have the ability to work flat and rigid cables
This machine is also ideal for industrial use
The blades and rollers rotate together at the same time by means of the gear so that the cable does not slip
The springs are adjustable to give the right cutting pressure