Active Member
|
[China]
Address: 3rd Floor,Zhixinmao Technology Park,Chuangxin Road,Tangxiachong,Bao'an District,Shenzhen,China
Contact name:Zhang
Shenzhen Zenhon Technology CO.,LTD |
|
|
DVI 1.2 , Over Single CAT5e/6(60M) , Full HD 1080P , Extender
SPECIFICATION
| Length of CAT | 6 cable between Transmitter and Receiver-Up to 60 meters |
| HDMI Input | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format input | DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD |
| HDMI Output | 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i |
| Support audio format output | LPCM7.1/DTS/Dolby-AC3/DSD |
| Max bandwidth | 165MHz |
| Max baud rate | 4.95Gbps |
| Input Video signal | 0.5~1.5Volts p-p |
| Output DDC signal | 5Volts p-p (TT1L) |
| Input/Output HDMI cable distance | ≤20m AWG26 HDMI standard cable |
| Max working current | 800mA |
| Power adapter format | Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A |
| Operating Temperature range | (-15 to +55℃) |
| Operating Humidity range | 5 to 90%RH (No Condensation) |
FEATURES
1.Signal transmission :CAT5e or CAT6(recommended) cables up to 60 meters instead of HDMI cables are connected between TX and RX Extender.
2. Support DVI1.2,HDCP 1.2 protocol compliant.
3. Support video input : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
4. Support video output : 24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i.
5. Support CEC.
6. Audio format support :
DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD.
7. No loss of quality.
8. Installs in minutes.
9. Need DC5V/1A power supply.
PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal
input(S),output(S)and power requirements.
DVI Input ------------------------------------DVI Input port
DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
CAT5e/6 Out -----------------------------CAT5e/6 output
EDID -------------------------------------EDID copy button
CAT5e/6 In ---------------------------------CAT5e/6 Input
DC/5V-------------------------------------------Power Input
Power---------------------------------------Power Indicator
DVI Output --------------------------------DVI output port
CONNECT AND OPERATE
Before installation, please make sure all devices you wish to connect have been turned off.
1. Connect DVI signal source to the transmitter of DVI extender.
2. Use LAN cable(Recommend:CAT5e/6) to connect transmitter and
receiver of DVI Extender.
3. Connect the display equipment with DVI connector to the receiver of
DVI extender.
4. Power on all connected devices, Choose the input of the display device
to its DVI channel.
