Active Member
|
[China]
Address: No19,Genyu Road,Yutang Street, Guangming District,Shenzhen, Guangdong,China
Contact name:Linda Ma
Shenzhen Weigu Electronic Technology Co., Ltd. |
|
|
P8 Outdoor Full color LED Display for Meeting room / TV studio
Description:
This products are used in all-weather application.
It is widely use for Meeting room,TV studio,Church,Concert,Theme
park,Shopping mall,Hotel,Airport,Railway station,etc.
we have big stock for indoor and outdoor regular led display and
led module wholesale.
P8 Outdoor Full color LED Display Specification
| Product Name | Specification | ||||||||||
| Pixel Pitch | 8mm | ||||||||||
| Pixel Configuration | 1R1G1B/SMD3535 | ||||||||||
| Density | 15,625 pixel/m2 | ||||||||||
| Moduel Size(L×W)mm | 256mm×128mm | ||||||||||
| Cabinet Size(L×W×H)mm | 768mm×768mm×130mm | ||||||||||
| Module Resolution | 32×16 | ||||||||||
| Cabinet Resolution | 96×96 | ||||||||||
| Driving Method | 1/ 4 Scan | ||||||||||
| Driving IC | MBI5124 or ICN 2038S | ||||||||||
| Brightness | 5000cd/㎡ | ||||||||||
| Contrast | 1000:1 | ||||||||||
| Brightness Adjustment | Auto and Manual | ||||||||||
| Power Consumption | Max Power:450W | ||||||||||
| Average power: ＜200W | |||||||||||
| Module Weight | 0.35kg | ||||||||||
| Color Temperature | 9500K—11500K | ||||||||||
| Horizontal Viewing Angle | 140º | ||||||||||
| Vertical Viewing Angle | 140º | ||||||||||
| Signal Processing | 10 or 14bit | ||||||||||
| Grey Processing | 1024×1024×1024 16834×16834×16834 | ||||||||||
| Control Distance | cable100m,Multimode500m,Single mode 2km | ||||||||||
| Frame Frequency | 65 Hz | ||||||||||
| Refresh Rate | >1920Hz | ||||||||||
| Control Mode | Synchronous/Asynchronous | ||||||||||
| The Opposite Calibration Curve | With Eight Optional Gamma Calibration Curve | ||||||||||
| Users can choose the recommended curve or adjust it based on actual situation | |||||||||||
| MTBF | >50000 hours | ||||||||||
| Life Span | 100,000 Hours | ||||||||||
| Operating Temperature | Working : -20 - 65 ℃ | ||||||||||
| Storage : -40 - 85 ℃ | |||||||||||
| Environment Temperature | -30℃ to 60℃; humidity Rh10% to 95% | ||||||||||
Reliability Test
In order to avoid the potential defects caused in the design and
production , we conduct a series of reliability test such as the
electronic performance test for the semi-finished products , the
anti dust test, the waterproof test , the anticorrosion test( salty
spraying test ), the vibration test and thermal shock tester etc.
The reliability test for the semi-finished products: Before gluing
semi-finished modules , more than 48 hours aging should be made in
the high temperature for all the modules , After QC inspection ok
then can package itThe reliability test for the finished products.:
After assembling finished modules to the led cabinets and
simulating the assembly for the whole cabinets , we keep them aging
for more than 72 hours , if no defects found , then we will
delivery goods to our customers .The waterproof test : During the
rainy seasons , the waterproof performance for the outdoor led
display is quite important. the performs high-press water spraying
as well as against the front cabinet to ensure, if waterproof test
in good conditions , therefore , protection rate can reach IP65The
anti corrosion test : In order to ensure the reliability of anti
corrosion of the PCB and cabinet , hence the salty spraying test
must be made during the productions Vibration test : For different
kind of screens , in order to ensure the reliability of
transportation and moving , therefore , the simulated vibration
test must be conducted .The environment test : The real outdoor
environment can ensure the effects of display in factory are the
same as the spot effects
