|
[China]
Trade Verify
Address: Shenzhen Omini Technology Co., Ltd 605, Tongxin Technology Building, Qiaotou Community, Fuhai Street, Baoan District, Shenzhen
Contact name:Xu
Shenzhen Omini Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Long RO4350 High Frequency Printed Circuit Board for Satellite
System
Quick details:
Base Material: Rogers, Arlon, Nelco, Taconic
Copper Thickness: 1oz
Board Thickness: 0.8mm
Min. Hole Size: 0.25mm(Mechanical),0.1mm(HDI)
Min. Line Width: 0.075mm
Min. Line Spacing: 0.075mm
Surface Finishing: Immersion silver/Gold Finger/Immersion
tin/ENIG/ENEPIG
Board Size: Customize Min:6mm*6mm Max:457mm*610mm
Product name: High Frequency PCB
Application: Telecommunications, Power Amplifier, Low Noise
Amplifier, Military and Aerospace, RF microwave
Sheet thickness: 0.1mm-7mm
Maximum board width: Customize
Type: High Frequency PCB
Certificate: TS16949.ISO14001.ROHS. ISO9001
Color: Green, White, Blue, Black, Red, Yellow
Package: Vacuum packing
Row Materials:
| Vendor | Productions | Vendor | Productions |
| Rogers | RO3001 | Taconic | TLX |
| Rogers | RO3003 | Taconic | TLC |
| Rogers | RO4350 | Taconic | RF-30 |
| Rogers | RO4233 | Taconic | FEP |
| Rogers | RO4450B | Taconic | TLG |
| Arlon | 49N | Nelco | Meteorwave 1000 |
| Arlon | Diclad | Nelco | N4800-20 |
| Arlon | CLTE | Nelco | N4350-13 RF |
| Arlon | 25FR | Nelco | N4380-13 RF |
| Arlon | 25N | Nelco | N9000-13 RF |
Description of High Frequency Printed Circuit Board Advantage:
1.High efficiency
Generally speaking, the consumption of high-frequency circuit
boards benefits from its small dielectric constant, so the
consumption is naturally smaller than that of other circuit boards.
Under such excellent congenital conditions, the induction heating
technology at the forefront of technological development can also
meet the needs of target heating, so that the efficiency of
high-frequency circuit boards is very high. Of course, while
pursuing efficiency, environmental protection cannot be abandoned.
2.High speed
As we all know, the transmission speed is directly proportional to
the dielectric constant. In terms of electrical principles, the
transmission speed is inversely proportional to the square root of
the dielectric constant, that is, the larger the dielectric
constant, the slower the transmission speed; the smaller the
dielectric constant, the slower the transmission speed. faster.
This is one of the reasons why PCB high-frequency boards are
popular with everyone. It uses special materials, which can well
ensure the characteristics of small dielectric constant, and can
also ensure the transmission speed while making the operation of
the circuit board relatively stable.
3.Adjustable degree
Widely used in high-frequency circuit boards in various industries
that require heating treatment of precision metal materials. In its
field of technology, it can not only realize the heating of
components with different depths, but also focus on heating for
local characteristics, whether it is the surface or deep layers ,
centralized or decentralized heating methods can be easily
completed.
4. Strong tolerance
The environment affects the composition of the medium, so
high-frequency circuit boards still have some environmental
requirements, especially in the south where there are more humid
weather. High-frequency circuit boards can well adapt to such an
environment. High-frequency circuit boards made of materials with
extremely low water absorption can challenge such environments. At
the same time, it is best to make PCB circuit boards have the
advantage of resisting chemical corrosion, so that they It is
resistant to moisture and high temperature in humid environment,
and has great peel strength.
Specification of Omini High Frequency PCB Printed Circuit Board:
| 1 | Layer | 2-24 layer |
| 2 | Material | Rogers: 4350B, 5880, 4003C, SY SCGA-500, S7136, Arion, Taconic |
| 3 | Board thickness | 0.4mm-5.0mm |
| 4 | Max.finished board side | 457mm*610mm |
| 5 | Min.drilled hole size | 0.25mm |
| 6 | Min.line width | 0.075mm(3mil) |
| 7 | Min.line spaceing | 0.075mm(3mil) |
| 8 | Surface finish/treatment | Electroless/immersion gold/ENIG/Immersion silver/Organic solderability |
| 9 | Copper thickness | 0.5 oz - 2.0oz |
| 10 | Solder mask color | green/black/white/red/blue/yellow |
| 11 | Inner packing | Vacuum packing, Plastic bag |
| 12 | Outer packing | Standard carton packing |
| 13 | Hole tolerance | PTH:±0.076, NTPH:±0.05 |
| 14 | Certificate | UL, ISO9001, ISO14001, RoHS, CQC |
| 15 | Profiling Punching | Routing, V-CUT, Beveling |
| 16 | Assembly Service | Providing OEM service to all sorts of printed circuit board assembly |
FAQ:
Q1:Does Omini have enough capacity to prodece high-quality products?
A: Omini has 20 years of history in manufacturing PCB, more than 200 employees and 10,000㎡ factory area.We got the UL, ISO9001 certificates, and our production is sold abroad. We have engouh machines & equipment to ensure the quality, please check our Production Equipment list picturers.
Q2:How long does customers need to wait for the quotation and lead time?
A: We have a prefessional group to deal with your inquiry. In our working time, we will reply to your email within 30 minutes to show we have received your inquiry, Then we will send you our quotation in no more than 6 hours. Please noticed our working time is Monday to Friday, 8am to 24pm.
Q3:How can I make sure my PCB gerber is safety?
A: We promise we won't divulge your gerber to the 3rd party, one of our responsibilities is protecting customer information privacy and security, customer information can be included: company name, address, number, trademark, ect. And we could sign NDA with client if necessary.
