Active Member
|
[China]
Address: Guangyang Plot, Langfang City, Hebei Province, China
Contact name:janne
Langfang pangolin construction machinery co. LTD |
|
|
Wear Resistant 6㎥ Volume Drilling HDD Mud Recycling System
Machine Shale Shaker For HDD Mud Recycling System Easy To Operate And Safe
Introduction
The HDD drilling fluid recovery system is designed for horizontal
directional drilling rigs (HDD).
According to the needs of drilling mud, HDD mud recovery system can
include vibrating screen, desilting cyclone, desilting cyclone,
decanter centrifuge, mud tank, mud agitator, mud gun, transfer
pump, etc. The mesh size of the vibrating screen will be based on
the performance of the vibrating screen for mud flow and drilling
mud separation, and in different mud requirements.
Main structural features
1. Good capacity and performance: The system capacity can reach
240m3/h (1000GPM), which can meet the slurry treatment of
large-scale trenchless projects.
2. All parts of the equipment are connected quickly, easy to
disassemble and save time.
3. Explosion-proof lamps meet the requirements of night
construction, easy to operate, safe and reliable.
4. The high-abrasion resistant polyurethane cyclone separator is the same as the international brand, and can be used for more than 3800 hours, with long service life and good interchangeability.
Advantages
1. Modular design, small footprint, flexible configuration and
installation according to customer requirements.
2. The side plate of the mud box is designed as corrugated bearing
heavy duty, safe and reliable, and can bear large load.
3. The system adopts electric centralized control, which is easy to
operate.
4. All equipment adopts corrosion-resistant and wear-resistant
design with long service life.
5. Suitable for harsh drilling conditions, cold resistance, heat
resistance, explosion-proof, leak-proof, corrosion-resistant, and
rain-proof.
6. Simple installation and disassembly, convenient for frequent
movement of drilling personnel.
Product parameters
| Customized | YES |
| Capacity | 50-240 ㎥/h (200-1000 GPM) |
| Screen Area | 2.2-8.4 ㎡ |
| Separation Stage | 2stage / 3stage |
| Tank Volume | 6 -30 ㎥ |
| Total Power | 25-184 Kw |
| Total Weight | 5.5-20 t |
| Land Transport Dimension (mm) | customized |
| Screen material | Polyurethane |
| Cyclone (mm) | 250 -900 |
| Impeller material | Cr26 |
| Application | Drilling |
| Specification | Can be customized according to requirements |
| Model | CSJ-FN-30C | CSJ-FN-60C | CSJ-FN-120C | CSJ-FN-200C | |
| Capacity (m3/h) | 30 | 60 | 120 | 200 | |
| Slurry pump | Model | DC-EHM-1.5C | DC-EHM-3C | DC-EHM-3C | DC-EHM-4C |
| Power (Kw) | 7.5 | 11 | 22 | 37 | |
| Pressure (MPa) | 1.0~2.0 | ||||
| Shale shaker | Power(Kw) | 1.5 | 2 | 3 | 3 |
| Vibration force(KN) | 30 | 40 | 60 | 60 | |
Screen size (mm) | UP | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 |
| Down | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 | |
| Cone Model | FN-100 | FN-150 | |||
| Cone Number | 3 | 6 | 12 | 8 | |
| Separation size (μm) | 10-30 | ||||
| Total Power (KW) | 9 | 13 | 25 | 40 | |
| System Max.Size(mm) | 1650X1450X2150 | 2000X1600X2250 | 2170X2000X2400 | 2400*2300*2400 | |
| System weight (Kg) | 1200 | 1900 | 2500 | 3500 | |
Field of use
HDD mud recovery system working procedures
1. There is a drilling rig on each side of the drilling rig, and a
set of vertical mud pumps are installed on the top of the drilling
rig to feed the vibrating screen. The shale shaker separates the
drilling cuttings, and the fluid part falls into the sand trap
through the screen holes.
2. After 1 or 2 or 3 sets of desander cyclone separators are placed
on the shaker, a set of centrifugal pumps will be used in the
second stage to separate the desander cyclone. Solid desander will
be discharged from the shaker or directly cut the box and liquid
flow desander will flow into the desander chamber.
3. After the de-sander, a certain number of de-sand cyclones will
be placed to separate fine particles. The solids except the de-sand
will be discharged into the vibrating screen or cuttings box, and
the fluid in the de-sand will enter the de-sand chamber .
4. The mixing pump is installed on the anti-skid trough to
transport the drilling mud and inject the mud into the mud hopper
to remix the new mud with new chemicals. The mixing hopper can be
installed on the top of the tank or on the slider according to
customer requirements.
Pic Show
FAQ:
1. How to order products?
Please send an inquiry with a detailed item description or model number.
2. How about ordinary packaging?
A: If there is no special packaging requirement, we will handle it as normal packaging. Put them in a small carton first, and then put them in a big carton together to ensure that the goods are complete.
3. Can I expect high-quality products?
Yes. Mature production technology ensures that product quality meets international requirements.
4. How to confirm whether the product is what you want?
Answer: If possible, please attach a reference picture to avoid misunderstanding, or attach any link to our website for better understanding.
5. How to control quality?
A: We have our own experienced QC team, each order will be strictly inspected and tested before shipment.
6. Competitive price:
A: Our factory can provide you with the lowest price and sell directly to customers, no distributors are needed!
