Langfang pangolin construction machinery co. LTD |
|
200GPM 50㎥/H 2 Stage HDD Slurry Mud Recycling System
Good Capacity And Performance HDD Mud Recycling System
The main structure features
1. Good capacity and performance: the system capacity is up to
240m3/h (1000GPM), can meet the mud treatment of large-scale
trenchless projects.
2. The equipment parts are fast connected, easy to disassemble,
saving time.
3. High wear-resistant polyurethane cyclone is the same as
international brands, and can be use more than 3,800 hours, long
service life, interchangeable.
4. Explosion-proof light to meet night construction, easy to
operate and safe.
Advantages
1. With modular design and small footprint, it can be flexibly
configured and installed according to the customer’s requirements.
2. The side plates of mud tanks are designed with corrugated and
load-supporting type, which are safer and can bear more load.
3. Adapt to severe drilling operation conditions, with the functions of cold resistance, heat resistance, explosion proof, leakage proof, corrosion resistance and rain proof.
4. Simple installation and disassembly, easy for drilling personnel
to move frequently.
5. The system adopts a centralized electric control, being
convenient for operation.
6. All equipment is designed with corrosion and wear resistance,
with a long service life.
Product parameters
Customized | YES |
Capacity | 50-240 ㎥/h (200-1000 GPM) |
Screen Area | 2.2-8.4 ㎡ |
Separation Stage | 2stage / 3stage |
Tank Volume | 5-30 ㎥ |
Total Power | 25-184 Kw |
Total Weight | 5.5-20 t |
Land Transport Dimension (mm) | customized |
Screen material | Polyurethane |
Cyclone (mm) | 250 -900 |
Impeller material | Cr26 |
Application | Drilling |
Specification | Can be customized according to requirements |
Model | CSJ-FN-30C | CSJ-FN-60C | CSJ-FN-120C | CSJ-FN-200C | |
Capacity (m3/h) | 30 | 60 | 120 | 200 | |
Slurry pump | Model | DC-EHM-1.5C | DC-EHM-3C | DC-EHM-3C | DC-EHM-4C |
Power (Kw) | 7.5 | 11 | 22 | 37 | |
Pressure (MPa) | 1.0~2.0 | ||||
Shale shaker | Power(Kw) | 1.5 | 2 | 3 | 3 |
Vibration force(KN) | 30 | 40 | 60 | 60 | |
Screen size (mm) | UP | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 |
Down | 1400X600 | 1700x700 | 1900X1000 | 2100x1200 | |
Cone Model | FN-100 | FN-150 | |||
Cone Number | 3 | 6 | 12 | 8 | |
Separation size (μm) | 10-30 | ||||
Total Power (KW) | 9 | 13 | 25 | 40 | |
System Max.Size(mm) | 1650X1450X2150 | 2000X1600X2250 | 2170X2000X2400 | 2400*2300*2400 | |
System weight (Kg) | 1200 | 1900 | 2500 | 3500 |
Introduction
HDD mud recycling system is design for Horizontal Directional
Drilling ( HDD ) rig.
Depending on drilling mud requirement, a HDD mud recycling system
can including shale shaker, desander cyclone, desilter cyclone,
decanter centrifuge, mud tank, mud agitator, mud gun, transfer
pump, etc. The shaker screen mesh size will depending on a shaker
performance for mud flow and drilling mud separation at different
mud requirement.
HDD Mud Recycling System Working Procedure
1. There is a drill pit at each side of drilling hole, a set of
vertical slurry pump will set on top of mud pit for feeding shale
shaker. The shale shaker screen will separate drilling cuttings and
discharge out, fluids part will drop into sand trap through screen
hole.
2. After placing 1 or 2 or 3 sets of desander cyclone separators on the shale shaker, a set of centrifugal pumps will provide swirling feed for the desander for the second phase separation. The solids in the desander will be directly discharged into the desander or the slitter box, and the excess liquid will flow out of the desander into the desander compartment.
3. The desander goes through a cyclone separator of the desander
for fine solid separation. The solids coming out of the desander
will be discharged into the vibrating screen or chip cutting box,
and the liquid flowing out of the desander will fall into the
desander compartment.
4. A mixing pump sit on tank skid for drilling mud transfer and
feed mud into mud hopper for new mud remix by new chemicals. The
mixing hopper can sit on top of tank or tank skid as per client’s
demand.
Pic Show
FAQ:
1. How to order the products?
A: Please send the inquiry with detail item description or with Model number.
2. How about the common packing?
A: If there is no special packing demand, we will take it as our normal packing. First in small carton, and then put in the bigger carton together to make sure goods completed.
3. Can I expect a quality products?
A: Yes. mature production technology ensuring the quality satisfy international request.
4. How to control quality?
A: We have our own experienced QC team,there will be strict inspection and testing for each order before shipping out.
5. Fast delivery time:
A: Usually it takes 25 days for production.only 3 or 5 days if we have stock of your request size.
6. Competitive price:
A: Our factory can supply you the lowest price due to direct sale to customers without distributor!