Home Companies Shenzhen Okaf Technology Co., Ltd.

Air Compressor Operate Portable Antenna Mast , Telescoping Antenna Pole With Tripod

Shenzhen Okaf Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: 3rd Floor, No. 13, Huiye Road, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen,Guangdong, China

Contact name:Anne

Inquir Now

Shenzhen Okaf Technology Co., Ltd.

Air Compressor Operate Portable Antenna Mast , Telescoping Antenna Pole With Tripod

Country/Region china
City & Province shenzhen guangdong
Categories Other Advertising Equipment
InquireNow

Product Details

 

What is a Pneumatic Mast?

Pneumatic masts are a type of elevation solution using compressed air to raise the central column to its extended height. The masts can either be locking, which each section locks into place once it reaches its maximum extension - designed for safety and long term use( do not lift down the mast), or non-locking where each section sits on cushion

of air- more appropriate for short time using.

 

Common application

Telecommunications, Surveillance, Broadcasting, Disaster Recovery, Site Surveys, Energy Production,
Site Security...and so on.

 

Mast specification

Available Extended height:3m to 30m
Head load capacity: 5kg to 300kg.

The one is promotional, with very low price and best discount!!!

 

5.8M Portable Aluminum Alloy Pneumatic Telescopic Antenna Mast
Model No.OK-QD-PP58S
Tube Material:Aluminum magnesium alloy 6063B
Tube surface treatmentAnodizing
Color:Bronze
Specification:5.8M
Closed length:1.76M
Extended length:5.8M
Max head-load:20kgs
Top plate:Round shape: diameter 150mm, thickness 10mm.With 4pcs*8.5mm holes
Bottom plate:Round shape: diameter 280mm, thickness 20mm.With 3pcs*20mm holes
Max Working pressure of the mast0.20MPA
Collar style:Non-locking collar
Working Temperature:-15--+50℃
Max Wind load :66km/h
AccessoriesTop plate -----------------------------------------1pc
Bottom plate -------------------------------------1pc
Control valve-------------------------------------1pc
Air pipe------ ------------------------------------ 1pc
Tripod --------------------------------------------1pc optional

Kindly refer to the following questions,when you send an inquiry:

1: How is max height and how is probably payload do you need?

2: Do you need Pneumatic or manual mast ?

3: Where do you use? 

 

Operation steps

1.check the mast in good condition
2.fixed the mast on the ground. tripod fixed diameter is 3.4m,guy wire fixed diameter is 8m.
3.air inlet of control valve connect with air compressor.
4.air outlet of control valve connect wtih the mast.
5. once all mounted, you must keep the lifting control valve handle bar in middle location. (it make the air do not come into mast)
6.open the air compressor switch, at same time adjust the pessure regulating switch to reach 0.2MPa which the pressure gauge shows.
7.then pull up the lifting valve handle bar, mast will rise.
8.if you want to make the mast stop in some height, just make the handle bar in middle.

9. when lift down the mast, please pull down the lifting control valve handle bar..

 

 

 

Hot Products

Vehicle LED PTZ Camera Serials Feature: 1,Acceptable to a variety signals of PTZ ,IP/SDI/AHD/TVI/CVI...
Features: 1. High-performance anti-shake technology to solve vehicle image blurring; 2. Using ...
Vehicle Infrared Monitoring Mounted PTZ Camera Intelligent Infrared Night Vision Network Camera 360° ...
Vehicle Mounted Camera For Surveillance Auto Tracking PTZ Security Camera PTZ Security Camera Order ...
Product Description Vehicle Roof Mounted PTZ Camera High Definition 1920*1080P AHD IP SDI CCTV ...
Vehicle Mounted Onvif PTZ IP camera High Definition Full HD CCTV Camera 1080P Specification ►Support ...