Active Member
|
[China]
Address: 716, Building 39, Liandong u Valley, No.100, Fengbin Road, Liangxi District, Wuxi City
Contact name:Liu
Dongtai Yaoqiang machinery Co.,Ltd |
|
|
High Grade Welding Equipment 3 Fonctions Welding Machine for H beam assembling straightening and welding
The H steel production line is used for welding the production of H steel. The production line can continuously complete the process of setting up, welding, orthodontics and discharging T-and H-section steel in the production process. The production process is controlled by program, and the welding speed is adjusted by frequency conversion technology.
This machine is suitable for use in smaller workplaces, and is affordable and functional. It consists of 3 H beam manufacturing processes: assembly - Welding - rectification. It can produce symmetrical and asymmetric cross sections of H and T beams. At the same time, it can complete the following procedures: initial and final assembly of beams, butt submerged arc welding of beams in vertical state, and correction of welding deformation (mushroom shape) of beams. The automatic assembly machine is equipped with flux circulation system to reduce flux consumption. The assembling and welding of H beam is automatic mode. In production, the movement speed of the beam can be adjusted by means of program-controlled monitor, so as to ensure the quality of the weld.
I. equipment composition:
1. main engine: including H steel assembly, welding, correction, roller conveyance, etc.
2. electronic control system: main control cabinet, PLC program system settings, and touch screen display lights.
3. groups of institutions: Web clamping, wing plate clamping and lower pressing device.
4. lifting mechanism: input roller device
5. discharging mechanism (including lifting mechanism 2): output roller device
6. hydraulic system: oil cylinder, hydraulic pump station and high pressure tubing lamp.
7. aligning mechanism: cylinder lifter
8. wire feeder assembly:
9. work platforms and escalators: accessories, etc.
10. welding power source two: power supply, control box, welding cable, control cable, etc. 11., two sets of flux recovery equipment: vortex air pump, recovery device, funnel, etc.
| Model | web height | web thickness | welding and straightening speed | flange width | flange thickness | overall power |
| YQPJ1000 | 1000mm | 6-16mm | 0.35-3m/min | 200-800mm | 6-20mm | 13.4kw |
| YQPJ1200 | 1200mm | 6-16mm | 0.35-3m/min | 200-800mm | 6-20mm | 13.4kw |
| YQPJ1500 | 1500mm | 6-16mm | 0.35-3m/min | 200-800mm | 6-20mm | 13.4kw |
Our company:
Jiangsu Yaoqiang Technical Group is a dealers holding type and
high-tech enterprise. It mainly supply welding, cutting, milling,
pipe producing production line as well as electrical automation
equipment. The group consists of Jiangsu Silver Coast International
Trading Development Co., Ltd (locate in Wuxi)& Dongtai Yaoqiang
Mechinery Manufacture Co., Ltd. While Wuxi company, which is
located in National technical industry park, i. e.The Wuxi Liandong
U Valley, besides the Taihu lake with beautiful scenery and
renowned humanities, is mainly focus on enterprise blue print,
R&D, marketing,trading, management and finance. The Dongtai
plant is devoted to technics, manufacture, process control, test
and after-service, which locates at Dongtai Tangyang Xinhong
Machinery industry park, in the wet land area off the seashore of
Huanghai.
So we are manufacturer and trader. The Wuxi part is for trading and
Dongtai part is for producing.
Here we make a promise to you all: we will offer you the products
with the ideal price and good quality.
If you have any problems or you are interested in our products,
Please contact me via Email or following ways:
| NO. | MODEL | YQPJ1500 |
| 1 | Web height | 1500 mm |
| 2 | Web thickness | 6~32 mm |
| 3 | Flange width | 150~800 mm |
| 4 | lange thickness | 6-40 mm |
| 5 | H beam length | 4000~15000 mm |
| 6 | Dimensional adjustment system | Separate, mechanical |
| 7 | welder | 2 sets of Mechanical submerged arc welding machine |
| 8 | Welder Power | 2×75KW |
| 9 | Welder type | automatic submerged arc welding |
| 10 | weld speed | 0-1000 mm/min |
| 11 | Weld speed adjustment | level and smooth |
| 12 | Head angle adjustment | ±45°±12.5 |
| 13 | Pressure of hydraulic system | ≤10 Mpa |
| 14 | Automatic welding cycle system | 2sets |
| 15 | Flux | 2×100 kg |
| 16 | Total power | 24 kw Except for welding power supply |
| 17 | Overall dimensions (L * w * h) | 30000×3270×5150 mm |
| weld size(mm) | wire diameter(mm) | welding current (A) | welding voltage(V) | welding speed(mm/min) |
| 4 | 3 | 350~370 | 28~30 | 880~910 |
| 6 | 3 | 450~470 | 28~30 | 900~960 |
| 4 | 480~500 | 28~30 | 960~1000 | |
| 8 | 3 | 500~530 | 30~32 | 730~760 |
| 4 | 670~700 | 32~34 | 800~830 |
| No. | Name | |
| 1 | welder | MZ-1000(optional,also can use CO2 welder) |
| 2 | Welding machine control box | MZ-1000 |
| 3 | Inverter manufacturers | 11KW,2.2KW HUICHUAN |
| 4 | Major electrical equipment manufacturers | SIEMENS, OMRON (Japan) |
| 5 | Hydraulic parts manufacturers | TAIWAN |
| 6 | main motor supplier | NANTONG |
| 7 | Wing web centering motor | 2 sets NINGBO |
| 8 | Main reducer manufacturers | CHANGZHOU |
| 9 | recovery equipment | 2 sets WUXI |
Supply matching:
Frame;
Console;
Pre assembled mechanism;
Feed roller table;
Delivery roller table;
2 sets of welding machine;
Hydraulic station;
Mushroom shaped deformation correcting mechanism for beam;
Welding console -2 sets for wire feed mechanism;
Wire box -2 parts;
Hydraulic hose;
Flux cycle system ----2 set;
Work platform and ladder;
The supply does not include:
1. foundation;
2. connect to the power and air source of the equipment;
3. equipment grounding;
4. welding wire or flux etc.
