Active Member
|
[China]
Address: 716, Building 39, Liandong u Valley, No.100, Fengbin Road, Liangxi District, Wuxi City
Contact name:Liu
Dongtai Yaoqiang machinery Co.,Ltd |
|
|
380V 50HZ HJ5060 Seam Gas Shield Welding Equipment Arc Column Boom Welding Manipulator
The automatic welding manipulator is successfully developed by our company based on years of technical experience in the development of welding equipment.
The welding power source is placed on the flat platform, and the welding cable is fixed on the side wall of the wall through the wire rack and cable trolley, etc., with good conductivity, stable current and voltage, high welding quality, high welding seam quality, and beautiful welding seam shape.
Frame of this seam welding manipulator is mainly composed of a trolley body, a column, a sliding plate mechanism, a walking reducer, a welding gun cross adjustment part, a flux recovery processing system, an electrical control system and a submerged arc welding machine.
| NO. | Equipment | Unit | HJ5060 | |
| 1 | Cross arm lifting stroke | mm | 5000 | |
| 2 | Cross arm telescopic stroke | mm | 6000 | |
| 5 | Cross arm extension speed | mm/min | 120-1200 | |
| 6 | Drive mode | Rack and pinion pair | ||
| 7 | Speed mode | Frequency conversion stepless speed regulation | ||
| 8 | Cross arm telescopic motor power | kW | 0.55 | |
| 9 | Cross arm lifting speed | mm/min | 1000 | |
| 10 | Drive mode | Sprocket chain pair | ||
| 11 | Column lifting motor power | kW | 3 | |
| 17 | Cross arm front end bearing capacity | kg | 200 | |
| 18 | Control line length | m | 15 | |
| 19 | Equipment structure | mobile | ||
| 20 | Cross fine-tuning stroke | Up down | mm | 100 |
| Left right | mm | 100 | ||
MZ-1000 submerged arc welding power source:
| No. | project | Unit | MZ-1000 |
| 1 | output characteristic | ||
| 2 | Power input voltage / frequency | Hz | 3P 380V±10%/50 |
| 3 | Rated output power | kW | 44 |
| 4 | Rated input current | A | 83 |
| 5 | Rated load persistence rate | 100% | |
| 6 | Current adjustment range | A | 60-1000 |
| 7 | Voltage adjustment range | V | 20-50 |
| 8 | Output no-load voltage | V | SAW:90±10 MMA Hand arc:75±5 |
| 9 | Full load efficiency | 92% | |
| 10 | Full load efficiency factor | 0.88 | |
| 11 | welding wire | mm | 2-5 |
| 12 | Wire feeding speed | cm/min | 40-450 |
Ys-hs150a flux collector:
| No. | Project | Unit | Specification |
| 1 | Equipment model | YS-HS150A | |
| Motor power | KW | 4 | |
| 2 | Gas pressure | MPa | 0.2-0.8 |
| 3 | Maximum recovery | KG | 80 |
| 4 | vacuum degree | KPa | 14.4 |
