Product configuration | case | Aluminum alloy face ring + plastic bottom case | strap | TPU |
Product size (mm) | φ46.2*9.82mm | colour | black, blue, pink |
Product Net Weight (g) | 48g | Operating temperature | 10-50 degrees |
charging connector | charging stand | Charging parameters | 5V/180mAh |
Packaging size (mm) | 148*96*21.5mm | strap size | |
standard packaging | Bracelet*1 Charging stand*1 Manual*1 | Net packing weight (grams) | |
|
Hardware Configuration | hardware class | describe | Remark | |
main chip | SYD8811 main control, RAM.512KB ROM; 64Mb external ROM | | |
Accelerometer | SC7A20 three-axis gravity sensor | | |
Photoelectric sensor | Dual photoelectric heart rate sensor BD1662 | | |
Screen | 1.28 inch 240*240 TFT small tail display | | |
touch | full touch | support | |
ambient temperature | Operating temperature | 10-50 degrees | |
Charge | charging stand | | |
Adaptation method | Can be used independently or at the same time as mobile APP | | |
storage | External Flash 64Mb | | |
|
Function introduction | System software category | describe | Remark | |
andiordsystem | Support Android 5.0 and above | | |
IOSsystem | Apple IOS11.0 and above | | |
Step count | The wristband monitors the step count in real time. The number of
steps must exceed the starting step (20) before recording. When the
number of steps does not exceed the starting step (20), the
wristband does not record data. | | |
sleep monitoring | 1. The bracelet displays the total time, deep sleep time, light
sleep time and wake-up time. The time to fall asleep and wake up
can be viewed on the app. 2. Sleep monitoring is performed from
22:00 pm to 9:00 am, and no monitoring is performed at other times. | | |
alarm clock reminder | APP settings, when the set time is reached, the bracelet vibrates
and the screen lights up to display the alarm reminder | | |
Drink water reminder | APP settings, within the set time range, after meeting the time
interval requirements, the bracelet vibrates and the screen lights
up to display a reminder to drink water | | |
Sedentary reminder | 1. APP settings, within the set time range, the bracelet will
vibrate after the time interval requirement is met, and the
sedentary reminder icon will be displayed on the screen 2. If there
are more than 50 steps in the time interval, the reminder time will
be changed from Reminder 60 minutes after exercise, until it meets
the situation of no exercise for nearly 60 minutes. | | |
Exercise compliance reminder | After the step count of the bracelet reaches the target number of
steps set by the app, the bracelet will light up and vibrate to
display the standard reminder. | | |
sport mode | Support 10 sports monitoring and record different project data for
different sports (running, walking, mountaineering, basketball,
table tennis, cycling, tennis, swimming, badminton, football) | | |
Remote control camera | 1. After the bracelet is connected to the app, start the camera in
the app and touch the bracelet or shake it for remote shooting. 2.
After the mobile phone is exited, the bracelet can exit the camera
mode, and the bracelet cannot exit automatically (the corresponding
camera permission must be given to the app) | | |
Caller information reminder | Support incoming calls, SMS, Instagram, Email, FaceBook, Wechat,
Line, Weibo, Linkedln, QQ, CooglePlus, WatsApp and other mobile
applications | | |
Heart rate automatic detection | After connecting to the APP, the automatic heart rate check will be
monitored for 24 hours, and the heart rate light will be activated
every 30 minutes to conduct a heart rate test. The heart rate data
can be viewed in the 24-hour heart rate module. | | |
Heart rate/blood pressure/blood oxygen detection | Start the heart rate/blood pressure/blood oxygen detection
measurement on the bracelet or app, the longest measurement time is
60S, and the measurement value will be displayed after the end | | |
Watch face download | Support local watch face, recommended watch face download, custom
watch face download | | |
music control | The bracelet can control the music player on the mobile phone,
click the icon to switch to the previous song, pause/start, and the
next function; iOS devices need to pair the bracelet with the
mobile phone. | | |
Raise your wrist to brighten the screen | After the app turns on the function, lift the wrist, and the
bracelet lights up and displays the time interface; | | |
bright adjustment | The bracelet supports switching 5 levels of brightness adjustment,
the brightness needs to change significantly between each level,
the default is 3 levels | | |
night mode | Within the set time range, turn off the wrist lift to brighten the
screen function and automatically adjust the screen brightness of
the bracelet to the lowest | | |
reset | Start to restore factory settings, reset the wristband, and clear
all the data in the wristband (both wristband and APP can activate
this function) | | |
Do not disturb | After the function is turned on, the bracelet does not respond to
third-party application message reminders within the set time | | |
find phone | After connecting the app, when the bracelet starts to find the
phone, the phone vibrates and plays a ringtone | | |
Find a bracelet | After connecting the app, start the function of finding the
bracelet, the bracelet will turn on and vibrate to remind | | |
Key Function | Upper right button: off screen/bright screen Lower right button:
shortcut to enter sports mode | | |
unit format switch | The bracelet supports 24-hour/12-hour, km/mile, Celsius/Fahrenheit
switching (can be set on the app side) | | |
weather information | Connect the app bracelet to display the temperature range and
weather type (you need to give the app location service permission
and network to obtain third-party weather information) | | |
stopwatch | The bracelet enters the stopwatch interface, and you can choose to
start/pause the timing | | |
Lock screen duration | Enter the bracelet lock screen interface, you can choose the lock
screen duration | | |
switch operation | 1. Click to confirm the shutdown on the shutdown interface, and
press and hold to turn it on after shutdown; 2. When the power is
5%, the bracelet will automatically shut down | | |
Firmware language | Support: Chinese, English, Default: English | | |
Message push support language | Message push language: Traditional Chinese, English, Japanese,
Cyrillic, Greek, German, Spanish, Hungarian, Russian, Portuguese,
Swedish, French, Ukrainian, Turkish, Icelandic, Arabic, Korean,
Danish , Polish, Italian, Hebrew. | | |
Languages supported by the app | App supported languages: Danish, Ukrainian, Russian, Indonesian,
German, Italian, Japanese, French, Polish, Simplified Chinese,
Traditional Chinese, English, Spanish, Korean, Turkish, Hindi ,
Czech, Thai, Swedish, Finnish, Dutch, Portuguese, Vietnamese,
Arabic, Hungarian, Slovak, Romanian, Malay, Hebrew, Greek | | |