Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
Incoloy 825 N08825 round bar black bright nickel alloy steel bar
What is Alloy 825 Bar?
Incoloy 825 alloy is chromium, nickel, iron based alloy in addition to copper and molybdenum. It is having a greater ability of being both oxidizing and reducing acid and stress corrosion cracking resistance. Also, it is completely resistant to pitting, abrasion and erosion. Additionally, it is fully resistant to phosphoric and sulfuric acid. This all has made the producers in making use of Incoloy alloy in manufacturing Incoloy 825 bar.
Furthermore, the product is having a greater ability of having high tensile strength, flexibility, durability and long-lasting. The Incoloy 825 bar is having good dimensional accuracy, is ruggedly constructed, excellent surface finishes, the ability to withstand in heavy loads and hold high temperature.
| Grade | Incoloy Alloy 825 / UNS NO8825 |
| Specification | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Standard | ASTM B425 / ASME SB425 |
| Size | 5 mm To 500 mm |
| Diameter | 0.1 mm to 100 mm |
| Length | 100 mm To 3000 mm Long & Above |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Form | Round Bars, Square Bars, Flat Bars, Threaded Bars, Hollow Bars, Hexagonal Bars, Triangular Bars |
| Application | Most commonly used in petroleum refineries, Boilers, Heat exchangers, Condensers, Pipelines, Cooling towers, Steam exhausts, Electric generation plants, On occasion will be found in fertilizer and chemical plants. |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe | Ti |
| Incoloy 800 | 0.05 max | 1.00 max | 0.05 max | 0.02 max | 0.03 max | 19.50-23.50 | 1.50-3.00 | 38.0-46.0 | 22.0 min | 0.06 – 1.20 |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
