P91 Alloy Steel Pipe ASTM A335 P91 Low Alloy Steel Seamless Pipe
1/2"- 5"
1. ASTM A335/ASME SA335 P91 Alloy Steel Pipes Specifications
- Size range: ½” nominal through 60” OD
- Wall Thickness up through 4” thick& heavier upon request
- Alloy Steel Pipes Specifications & Grades:
- SA-335 P5, P9, P11, P22, P91
- SA-213 T5, T9, T11, T22, T91
- A519 4130, 4140/42
- Rolled & Welded A-691
2. Steel Pipe/ Tube Harmonized System Codes (HS Code)
730410 Line pipe of a kind used for oil or gas pipelines: Of iron or
nonalloy steel:
730420 Casing, tubing and drill pipe, of a kind used in drilling for oil
or gas: Casing:
730431 Tubes, Pipes and Hollow Profiles, of Iron or Non-alloy Steel,
Cold-drawn or cold-rolled (cold-reduced)
730439 Other Tubes, Pipes and Hollow Profiles, of Iron or Non-alloy Steel
730441 Tubes, Pipes and Hollow Profiles, of stainless steel , Cold-drawn
or cold-rolled (cold reduced)
730449 Other Tubes, Pipes and Hollow Profiles, of Stainless Steel,
Seamless
730451 Tubes, Pipes and Hollow Profiles, of Other Alloy Steel, Cold-drawn
or cold-rolled (cold reduced)
730459 Other Tubes, Pipes and Hollow Profiles, of Other Alloy Steel,
730490 Other Tubes, Pipes and Hollow Profiles, Seamless, of Iron or Steel
3. ASTM A335/ASME SA335 P91 Alloy Steel Pipes Chemical Composition
C, % | Mn, % | P, % | S, % | Si, % | Cr, % | Mo, % |
0.05-0.15 | 0.30-0.60 | 0.025 max | 0.025 max | 0.50-1.00 | 1.00-1.50 | 0.44-0.65 |
4. ASTM A335/ASME SA335 P91 Alloy Steel Pipes Mechanical Properties
Tensile Strength, MPa | Yield Strength, MPa | Elongation, % |
415 min | 205 min | 30 min |
5. Outside Diameter & Tolerance
Outside Diameter & Tolerance |
ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, mm |
OD≤101.6 | +0.4/-0.8 |
101.6<OD≤190.5 | +0.4/-1.2 |
190.5<OD≤228.6 | +0.4/-1.6 |
Cold Drawn | Outside Diameter, mm | Tolerance, mm |
OD<25.4 | ±0.10 |
25.4≤OD≤38.1 | ±0.15 |
38.1<OD<50.8 | ±0.20 |
50.8≤OD<63.5 | ±0.25 |
63.5≤OD<76.2 | ±0.30 |
76.2≤OD≤101.6 | ±0.38 |
101.6<OD≤190.5 | +0.38/-0.64 |
190.5<OD≤228.6 | +0.38/-1.14 |
ASTM A530 & ASTM A335 | NPS | Outside Diameter, inch | Tolerance, mm |
1/8≤OD≤1-1/2 | ±0.40 |
1-1/2<OD≤4 | ±0.79 |
4<OD≤8 | +1.59/-0.79 |
8<OD≤12 | +2.38/-0.79 |
OD>12 | ±1% |
Wall thickness & Tolerance |
ASTM A450 | Hot rolled | Outside Diameter, mm | Tolerance, % |
OD≤101.6, WT≤2.4 | +40/-0 |
OD≤101.6, 2.4<WT≤3.8 | +35/-0 |
OD≤101.6, 3.8<WT≤4.6 | +33/-0 |
OD≤101.6, WT>4.6 | +28/-0 |
OD>101.6, 2.4<WT≤3.8 | +35/-0 |
OD>101.6, 3.8<WT≤4.6 | +33/-0 |
OD>101.6, WT>4.6 | +28/-0 |
Cold Drawn | Outside Diameter, mm | Tolerance, % |
OD≤38.1 | +20/-0 |
OD>38.1 | +22/-0 |
ASTM A530 | NPS | Outside Diameter, inch | Tolerance, % |
1/8≤OD≤2-1/2 | +20.0/-12.5 |
3≤OD≤18, WT/OD≤5% | +22.5/-12.5 |
3≤OD≤18, WT/OD>5% | +15.0/-12.5 |
OD≥20, WT/OD≤5% | +22.5/-12.5 |
OD≥20, WT/OD>5% | +15.0/-12.5 |
Length: 5800mm; 6000mm; 6096mm; 11800mm; 12000mm; and so on.
Max length: 16000mm
Keyword: High Pressure Steel Pipe, Boiler Steel Pipe, ASME SA335,
P1, ASTM A335
5. Applications
Typical applications include:
- Processing plant for sulphuric, phosphoric and acetic acids
- Pulp and paper processing
- Components in gas scrubbing plants
- Seawater cooling equipment
- Oil refinery components
- Wires in electrostatic precipitators
![](http://img.everychina.com/nimg/29/74/1666ecc2021a9472ff46281a99f4.jpg)