Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
Inconel 600 Alloy600 UNS N06600 Nickel Alloy Pipe Fittings Butt Welded Seamless Equal Unequal Tee
1. Introduction of Inconel 600 material
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.
2. Equivalents of Inconel 600 Tee or Alloy 600 Tee
STANDARD | UNS | WERKSTOFF NR. | EN | BS | GOST | OR | JIS | AFNOR |
INCONEL 600 | N06600 | 2.4816 | NiCr15Fe | NA 14 | XH60BT | ЭИ868 | NCF 600 | NC15FE11M |
3.Chemical Composition of Inconel 600 Tee
Cr | Fe | C | Mn | S | Si | Cu | Ni+Co |
14.0-17.0 | 6.0-10.0 | 0.15max | 1.0max | 0.015max | 0.5max | 0.5max | 72.0min |
4.Physical Properties of Inconel 600 Tee
DENSITY | 8.47 g/cm 3 / 0.306 lb/in 3 |
MELTING POINT | 1354 – 1413 (°C) / 2470 – 2575 (°F) |
POISSON’S RATIO | 0.29 |
SPECIFIC HEAT @ 70°F | 0.103 Btu/lb•°F |
THERMAL CONDUCTIVITY @ 70°F | 103 Btu•in/ft2•h•°F |
ELECTRICAL RESISTIVITY @ 70°F | 620 ohm•circ•mil/ft |
CURIE TEMPERATURE | -192°F |
MAGNETIC PERMEABILITY | 1.010 @ 200 oersted |
ANNEALED | 983 – 1010 °C |
QUENCH | Rapid Air/Water |
5.Inconel 600 Material Testing:
Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test