Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
Inconel Pipe SCH 10-XXS ASTM B407 Inconel 800 800H 800HT Pipe and Tube
1.Introduction of Inconel 800 800H 800HT
Inconel 800 Tubes has additional alterations to the joint aluminium and titanium stages to guarantee best high temp qualities. Incoloy 800HT Pipes has excellent creep - rupture qualities at temp over 600 Deg C. Incoloy 800H Pipes is characteristically utilized for functions concerning long - term of exposure to high - temperatures where confrontation is desirable from corrosion, carburization and other kids of high - temperature weathering.
2.NCONEL ALLOY 800 SEAMLESS & INCONEL ALLOY 800 WELDED PIPES & TUBES SPECIFICATION:
| Types | Out diameter | Wall thickness | Length |
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Seamless (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Welded (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
3.Incoloy 800/800H/800HT Pipes & Tubing Equivalent Grades
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 800 | 1.4876 | N08800 | NCF 800 | NA 15 | ЭИ670 | Z8NC32-21 | X10NiCrAlTi32-20 | XH32T |
| Incoloy 800H | 1.4958 / 1.4876 | N08810 | NCF 800H | NA 15(H) | ЭИ670 | Z8NC33-21 | X5NiCrAlTi31-20 | XH32T |
| Incoloy 800HT | 1.4859 / 1.4876 | N08811 | NCF 800HT | NA 15(HT) | ЭИ670 | - | X8NiCrAlTi32-21 | XH32T |
4 Incoloy 800/800H/800HT Pipes & Tubes Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 800 | 0.10 max | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800H | 0.05 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60 | 0.15 – 0.60 |
| 800HT | 0.06 – 0.10 | 1.50 max | 1.00 max | 0.015 max | 0.75 max | 39.50 min | 30.00 – 35.00 | 19.00 – 23.00 | 0.15 – 0.60ᴬ | 0.15 – 0.60ᴬ |
5.Testings (Destructive, Non Destructive):
| Positive Material Identification - PMI Testing |
| Chemical Analysis - Spectro Analysis |
| Mechanical Testing Such as Tensile, Elongation |
| Micro Test |
| Macro Test |
| Hardness Test |
| Pitting Resistance Test |
| Intergranular Corrosion (IGC) Test |
| Flaring Test |
| Flattening Test |
| Hydrostatic Test |
| Hydrogen-Induced Cracking (HIC) Test, NACE TM0284 |
| Sulfide Stress Corrosion Cracking (SSC), NACE TM 0177 |
| Radiography Test |
| Dye Penetrant Test (DP Test) |
| Ultra Sonic Test (UT) |
| Eddy Current Testing |
| Impact Test |
| Bend Test |
6.Packing:
We pack our goods in a various ways depending on the products. The different ways in which our products are packed are:
| Shrink-wrapped |
| Wooden Boxes |
| Wooden Pallets |
| Wooden Crates |
| Carton boxes |
