Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
MSS SP-44 EN1092-1 BS3293 ASME B16.5 Duplex 2205 Duplex Stainless Steel Flanges
1.EN1092-1
This European standard specifies requirements for circular steel
flanges in PN designations PN 2,5 to PN 400 and nominal sizes from
DN 10 to DN 4000. This standard specifies the flange types and
their facings, dimensions, tolerances, threading, bolt sizes,
flange face surface finish, marking, materials, pressure/
temperature ratings and flange masses.
Flange facing types according to DIN EN 1092-1
| Type A: flat face | Type D: groove face | Type G: O Ring recess |
| Type B: raised face | Type E: spigot | Type H: O Ring groove |
| Type C: tongue face | Type F: recess |
Flange facing dimensions
| DN | PN | f1 | f2 | f3 | f4 | w | x | y | z | α | R | |||||||||||
| 2.5 | 6 | 10 | 16 | 25 | 40 | 63 | 100 | 160 | 250 | 320 | 400 | |||||||||||
| d1 | ||||||||||||||||||||||
| 10 | 35 | 35 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 40 | 2 | 4.5 | 4 | 2 | 24 | 34 | 35 | 23 | - | 2.5 |
| 15 | 40 | 40 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 45 | 29 | 39 | 40 | 28 | - | |||||
| 20 | 50 | 50 | 58 | 58 | 58 | 58 | 58 | 58 | 58 | 58 | 58 | 58 | 36 | 50 | 51 | 35 | 41º | |||||
| 25 | 60 | 60 | 68 | 68 | 68 | 68 | 68 | 68 | 68 | 68 | 68 | 68 | 43 | 57 | 58 | 42 | ||||||
| 32 | 70 | 70 | 78 | 78 | 78 | 78 | 78 | 78 | 78 | 78 | 78 | 78 | 51 | 65 | 66 | 50 | ||||||
| 40 | 80 | 80 | 88 | 88 | 88 | 88 | 88 | 88 | 88 | 88 | 88 | 88 | 3 | 61 | 75 | 76 | 60 | |||||
| 50 | 90 | 90 | 102 | 102 | 102 | 102 | 102 | 102 | 102 | 102 | 102 | 102 | 73 | 87 | 88 | 72 | ||||||
| 65 | 110 | 110 | 122 | 122 | 122 | 122 | 122 | 122 | 122 | 122 | 122 | 122 | 95 | 109 | 110 | 94 | ||||||
| 80 | 128 | 128 | 138 | 138 | 138 | 138 | 138 | 138 | 138 | 138 | 138 | 138 | 106 | 120 | 121 | 105 | ||||||
| 100 | 148 | 148 | 158 | 158 | 162 | 162 | 162 | 162 | 162 | 162 | 162 | 162 | 5 | 4.5 | 2.5 | 129 | 149 | 150 | 128 | 32º | 3 | |
| 125 | 178 | 178 | 188 | 188 | 188 | 188 | 188 | 188 | 188 | 188 | 188 | 188 | 155 | 175 | 176 | 154 | ||||||
| 150 | 202 | 202 | 212 | 212 | 218 | 218 | 218 | 218 | 218 | 218 | 218 | 218 | 183 | 203 | 204 | 182 | ||||||
| 200 | 258 | 258 | 268 | 268 | 278 | 285 | 285 | 285 | 285 | 285 | 285 | 285 | 239 | 259 | 260 | 238 | ||||||
| 250 | 312 | 312 | 320 | 320 | 335 | 345 | 345 | 345 | 345 | 345 | 345 | - | 292 | 312 | 313 | 291 | ||||||
| 300 | 365 | 365 | 370 | 378 | 395 | 410 | 410 | 410 | 410 | - | - | - | 4 | 343 | 363 | 364 | 342 | |||||
| 350 | 415 | 415 | 430 | 438 | 450 | 465 | 465 | 465 | - | - | - | - | 5.5 | 5 | 3 | 395 | 421 | 422 | 394 | 27º | 3.5 | |
| 400 | 465 | 465 | 482 | 490 | 505 | 535 | 535 | 535 | - | - | - | - | 447 | 473 | 474 | 446 | ||||||
| 450 | 520 | 520 | 532 | 550 | 555 | 560 | 560 | 560 | - | - | - | - | 497 | 523 | 524 | 496 | ||||||
| 500 | 570 | 570 | 585 | 610 | 615 | 615 | 615 | 615 | - | - | - | - | 349 | 375 | 376 | 548 | ||||||
| 600 | 670 | 670 | 685 | 725 | 720 | 735 | 735 | - | - | - | - | - | 5 | 649 | 675 | 676 | 648 | |||||
| 700 | 775 | 775 | 800 | 795 | 820 | 840 | 840 | - | - | - | - | - | 751 | 777 | 778 | 750 | ||||||
| 800 | 880 | 880 | 905 | 900 | 930 | 960 | 960 | - | - | - | - | - | 856 | 882 | 883 | 855 | ||||||
| 900 | 980 | 980 | 1005 | 1000 | 1030 | 1070 | 1070 | - | - | - | - | - | 961 | 987 | 988 | 960 | ||||||
| 1000 | 1080 | 1080 | 1110 | 115 | 1140 | 1180 | 1180 | - | - | - | - | - | 6.5 | 6 | 4 | 1062 | 1092 | 1094 | 1060 | 28º | 4 | |
| 1200 | 1280 | 1295 | 1330 | 1330 | 1350 | 1380 | 1380 | - | - | - | - | - | 1262 | 1292 | 1294 | 1260 | ||||||
| 1400 | 1480 | 1510 | 1535 | 1530 | 1560 | 1600 | - | - | - | - | - | - | 1462 | 1492 | 1494 | 1460 | ||||||
| 1600 | 1690 | 1710 | 1760 | 1750 | 1780 | 1815 | - | - | - | - | - | - | 1662 | 1692 | 1694 | 1660 | ||||||
| 1800 | 1890 | 1920 | 1960 | 1950 | 1985 | - | - | - | - | - | - | - | 1862 | 1892 | 1894 | 1860 | ||||||
| 2000 | 2090 | 2125 | 2170 | 2150 | - | - | - | - | - | - | - | - | 2062 | 2092 | 2094 | 2060 | ||||||
| 2200 | 2295 | 2335 | 2370 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 2400 | 2495 | 2545 | 2570 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 2600 | 2695 | 2750 | 2780 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 2800 | 2910 | 2960 | 2000 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ||
| 3000 | 3110 | 3160 | 3210 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 3200 | 3310 | 3370 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 3400 | 3510 | 3580 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 3600 | 3720 | 3790 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 3800 | 3920 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| 4000 | 4120 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | |
| Flange facing types C, D, E, F, G and H are not used for PN 2,5 and
PN 6. Flange facing types G and H are only used for PN 10 to PN 40. |
|
2.MSS SP 44 Flange Specification
| MSS SP 44 Flanges Size Chart | 1/2" (15 NB) to 48" (1200NB) DN10~DN5000 |
|---|---|
| MSS SP 44 Flanges Standards | ANSI/ASME B16.5, B16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, GOST Flange, ASME/ANSI B16.5/16.36/16.47A/16.47B, MSS S44, ISO70051, JISB2220, BS1560-3.1, API7S-15, API7S-43, API605, EN1092 |
| MSS SP 44 Flanges Pressure Rating ANSI | Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS |
| MSS SP 44 Flanges Pressure Calculation in DIN | 6Bar 10Bar 16Bar 25Bar 40Bar / PN6 PN10 PN16 PN25 PN40, PN64 |
| JIS | 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K |
| UNI | 6Bar 10Bar 16Bar 25Bar 40Bar |
| EN | 6Bar 10Bar 16Bar 25Bar 40Bar |
| Coating | Oil Black Paint, Anti-rust Paint, Zinc Plated, Yellow Transparent, Cold and Hot Dip Galvanized |
| Most common types of MSS SP 44 | Forged / Threaded / Screwed / Plate |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Production technique |
|
| Connect Type/ Flange Face Type | Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, , Groove |
| Special design | As per your drawing AS, ANSI, BS, DIN and JIS |
| Test | Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector |
| Equipment | Press machine, Bending machine, Pushing Machine, electric bevelling machine, Sand-blasting machine etc |
| Origin | Indian / West Europe / Japan / USA / Korean |
| Manufacturer of | ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc. MSS SP 44: -BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/ KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange |
| MSS SP 44 Flanges Uses & application |
|
| Export to | Ireland, Singapore, Indonesia, Ukraine, Saudi Arabia, Spain, Canada, USA, Brazil, Thailand, Korea, Iran, India, Egypt, Oman, Dubai, Peru, etc |
| Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 | |
Prestige quality MSS SP 44 Flanges manufacturers in India offer these Carbon Steel MSS SP 44 Flanges in DIN, EN, BS, ISO, JIS or ANSI standard.
| Carbon Steel MSS SP 44 Flanges | ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80) |
| Stainless Steel MSS SP 44 Flanges | ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409 |
| Alloy Steel MSS SP 44 Flanges | ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91 |
| Titanium MSS SP 44 Flanges | ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium
Gr. 4, Titanium Gr. 5, Titanium Gr. 7 ASTM R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5 |
| Copper MSS SP 44 Flanges | T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc |
| Copper Nickel MSS SP 44 Flanges | ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640 |
| Brass MSS SP 44 Flanges | 3602 / 2604 / H59 / H62 / etc. |
| Inconel MSS SP 44 Flanges | ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750 MSS SP 44 |
| Hastelloy MSS SP 44 Flanges | ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flanges |
| Monel MSS SP 44 Flanges | ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500) |
| Alloy 20 MSS SP 44 Flanges | ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3 |
| Aluminium MSS SP 44 Flanges | 5052 /6061/ 6063 / 2017 / 7075 / etc. |
| Nickel MSS SP 44 Flanges | ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC |
| Duplex MSS SP 44 Flanges | S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Super Duplex MSS SP 44 Flanges | S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61 |
| Incoloy MSS SP 44 Flanges | ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flanges |
| 254 Smo MSS SP 44 Flanges | ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547 |
| Nimonic MSS SP 44 Flanges | Nimonic 75, Nimonic 80A, Nimonic 90 |
| Other MSS SP 44 Flanges material | Tin bronze, Alumunum bronze, Lead bronze |
