Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
EN1092-1 ASTM B564 inconel 825 alloy incoloy 825 UNS N08825 DIN 2.4858 Welding/loose plate flange
1. DIN EN 1092-1 Flange Types
| 01 (Plate [slip-on] flanges for welding) | 13 (Hubbed threaded flanges) |
| 02 (Loose plate flanges with weld-on plate collar) | 21 (Integral flanges) |
| 04 (Loose plate flanges with weld-neck collar) | 32 (Weld-on plate collars) |
| 05 (Blank [blind] flanges) | 33 (Lapped pipe ends) |
| 11 (Weld-neck flanges) | 34 (Weld-neck collars) |
| 12 (Hubbed slip-on flanges for welding) | 36 (Pressed collar with long neck) |
| 37 (Pressed collar) |
2. EN 1092-1 Incoloy 825 Flange Specifications
| Type | : | Inconel 825 Flange Standard EN 1092-1 |
| Size | : | ½” (15 NB) to 48″ (1200NB) / DN10-DN2000 |
| Standard | : | ANSI B16.5, ANSI B16.47, ANSI B16.36, ANSI B16.48, BS 4504, EN1092, UNI 2277/2278, DIN, JIS, SABS1123, GOST-12820 |
| Class | : | 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, DIN Standard ND-6,10, 16, 25, 40 Etc. |
| DIN | : | DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636,DIN2637, DIN2638, DIN2673 |
| BS | : | BS4504 , BS4504, BS1560, BS10 |
| Pressure | : | PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160 |
| In Form | : | SORF, WNRF, BLRF, SWRF, LAP Joint, Threaded, Reducing, Spectacle, etc |
| Specialize | : | As per drawing |
| Coating/Surface Treatment | : | Anti-rust Paint, Oil Black Paint, Yellow Transparent, Zinc Plated, Cold and Hot Dip Galvanized |
| Connection Type | : | Ring Type Joint, Lap-Joint Face, Raised Face, Flat Face, Large Male-Female, Small Male-Female, Large |
| Tongue & Groove, Small Tongue & Groove | ||
| Flange Face Type | : | Flat Face (FF), Raise Face (RF), Ring Joint (RJT) |
| Dimensions | : | EN 1092, ANSI B16.5, ANSI B16.47, Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings |
| Packing | : | No Fumigate or Fumigate Plywood/Wood Pallet or Case |
| Usage | : | Oil Field, Offshore, Water System, Shipbuilding, Natural Gas, Electric Power, Pipe Projects etc. |
3. ASTM B564 Incoloy 825 Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Incoloy 825 | 0.15 max | 1.00 max | 0.50 max | 0.015max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
4. ASTM B564 Incoloy 825 Flanges mechanical properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Incoloy 825 | 8.47 g/cm3 | 1413 °C (2580 °F) | Psi – 95,000 , MPa – 655 | Psi – 45,000 , MPa – 310 | 40 % |
5. Equivalent Grades for Incoloy 825 Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Incoloy 825 | 2.4816 | N06825 | NCF 825 | NA 13 | МНЖМц 28-2,5-1,5 | NC15FE11M | NiCr15Fe |
6. Flange facing types according to DIN EN 1092-1
| Type A: flat face | Type D: groove face | Type G: O Ring recess |
| Type B: raised face | Type E: spigot | Type H: O Ring groove |
| Type C: tongue face | Type F: recess |
7. Types and Drawings of EN 1092-1 Incoloy 825 Flange
