Active Member
|
[China]
Address: Room 1703, 17th Floor, Building 5, Jinyin Modern City, Guangdian South Road, Jinshui District, Zhengzhou City, Henan Province, China.
Contact name:Vicky
Zhengzhou Huitong Pipeline Equipment Co.,Ltd. |
|
|
FORGED 1/2"-24" 150LB-2500LB AS PER ASME B16.5 ALLOY 601 LWN FLANGE
1. Common Names
| Inconel 600 FLANGE | Alloy 600 FLANGE | UNS N06600 FLANGE | DIN 2.4816 FLANGE |
2. Inconel 601 Flanges Popular Searches
hastelloy flanges, Inconel 601 flange, Inconel 601 blind plate flanges, Inconel 601 raised face blind flanges, Inconel 601 lap joint flanges, Inconel 601 slip on plate flanges, Inconel 601 raised face socket weld flanges, Inconel 601 raised face threaded flanges, Inconel 601 raised face weld neck flanges, Inconel 601 hastelloy raised face slip-on flanges, Inconel 601 industrial pipe flanges, Inconel 601 flanges specifications, Inconel 601 flange price list, Inconel 601 threaded pipe flange, Inconel 601 flange price, Inconel 601 flange dimensions, Inconel 601 flange dimensions, Inconel 601 flange 150#, hastelloy Inconel 601 flanges dimensions, Inconel 601 flanges manufacturer.
3. About Inconel 601 Flanges
Hastelloy Inconel 601 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Grade |
| Inconel 601 | 0.10 max | 1.00 max | 0.50 max | 0.015max | 1.00 max | Balance | 58.0 – 63.0 | 21.0 – 25.0 | Inconel 601 |
Inconel 601 Plate Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Inconel 601 | 8.1 g/cm3 | 1411 °C (2571 °F) | Psi – 80,000 , MPa – 550 | Psi – 30,000 , MPa – 205 | 30 % |
Equivalent Grades for Inconel 601 Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR |
| Inconel 601 | 2.4851 | N06601 | NCF 601 | NA 49 | XH60BT | NC23FeA |
4. Other Inconel 601 Flanges we have
| Standard | Type | Class | Size |
| ASME B16.5 | WN/LWN/SO/Blind/Lap Joint | 150#-2500# | 1/2"-24" (Except Blind Flange 2500lb 1/2"-12") |
| SW flange | 150#-1500# | 1/2"-3" (Except 1500# 1/2"-2 1/2") | |
| Threaded | 150#-900# | 1/2"-24" | |
| 1500# 2500# | 1/2"-2 1/2" | ||
| ASME B16.47 Series A | WN/blind flange | 150# -900# | 22"-48" (Except 900# Size:26"-48") |
| ASME B16.47 Series B | WN/blind flange | 75#-300# | 26"-48" |
| 400# 600# 900# | 26"-36" | ||
| DIN2527 | Blind flange | PN6-PN100 | DN10-DN1000 |
| DIN2543 | SO flange | PN16 | DN10-DN1000 |
| DIN2544 | SO flange | PN25 | DN10-DN1000 |
| DIN2545 | SO flange | PN40 | DN10-DN500 |
| DIN2565 | Threaded flange with Neck | PN6 | DN6-DN200 |
| DIN2566 | Threaded flange with Neck | PN16 | DN6-DN150 |
| DIN2567 | Threaded flange with Neck | PN25 PN40 | DN6-DN150 |
| DIN2568 | Threaded flange with Neck | PN64 | DN10-DN150 |
| DIN2569 | Threaded flange with Neck | PN100 | DN10-DN150 |
| EN1092-1:2002 | Plate flange for welding/ loose plate flange with weld-on plate collar or for lapped pipe end/Blind Flange/WN flange | PN2.5-PN100 | DN10-DN4000 |
| JIS B2220 | Welding flange, lap joint flange, threaded flange | PN6-PN100 | DN10-DN1500 |
| BS4504 BS10 TableD/E | Plate Flange for welding/ WN flange/blank Flange | PN6-PN100 | DN10-DN1500 |
| Other Products | Anchor/swivel/girth/l ap joint/reducing/orifice | ||
Spectacle blind/paddle blind/ spacer ring/orifice plate/bleed ring | |||
Special Products: rings/ forgings/disc/shaft sleeves | |||
| Sealing Surface | RF FF RTJ TF GF LF LM | ||
| Flange Face Finish | Stock finish/spiral serrated/ concentric serrated/smooth finish (Ra 3.2 and 6.3 micrometers) | ||
| 125-250 AARH(it is called smooth finish) | |||
| 250-500 AARH(it is called stock finish) | |||
| Coating | Vanish, yellow paint, anti-rust oil, galvanizing etc | ||
| Material Grade | Nickel Alloy Steel | ASTM/ASME B/SB564 UNS N02200(NICKEL 200), UNS N04400(MONEL 400), | |
| UNS N08825( INCOLOY 825),UNS N06600(INCONEL 600), | |||
UNS N06601(INCONEL 601), UNS N06625(INCONEL 625), UNS N10276(HASTELLOY C276), | |||
ASTM/ASME B/SB160 UNS N02201(NICKEL 201), ASTM B/SB472 UNS N08020(Alloy 20) | |||
| Copper Alloy | ASTM/ASME B/SB151 UNS C70600(CuNi 90/10), C71500(CuNi 70/30) | ||
| Stainless Steel | ASTM/ASME A/SA182 F304,304L,304H,309H,310H, 316,316H,316L,316LN, | ||
| 317,317L,321,321H,347,347H | |||
| Duplex and Super Duplex Steel | ASTM/ASME A/SA182 F44,F45,F51,F53,F55,F60,F61 | ||
| Carbon steel | ASTM /ASME A/SA105(N) | ||
| Low Temp Carbon Steel | ASTM/ASME A/SA350 LF2 | ||
| High Yield Carbon Steel | ASTM/ASME A/SA694 F52,F56 F60, F65, F70 | ||
| Alloy Steel | ASTM/ASME A/SA182 GR F5, F9, F11,F12,F22,F91 | ||
| Titanium | ASTM/ASME B/SB381 Grade 2, Grade 5, Grade 7 | ||
5. Material Testing:
We at Ganpat Industrial Corporation ensure that all our materials
go through strict quality tests before dispatching them to our
clients.
• Mechanical Testing Such as Tensile of Area
• Hardness Test
• Chemical Analysis – Spectro Analysis
• Positive Material Identification – PMI Testing
• Flattening Test
• Micro and MacroTest
• Pitting Resistance Test
• Flaring Test
• Intergranular Corrosion (IGC) Test
6. PICTURE OF INCONEL 601
7. Inconel 601 Flanges we delivery to countries:
Thailand, Japan, Singapore, Trinidad & Tobago,Tunisia, Nigeria, Indonesia, Belgium, Macau, Bangladesh, Croatia, Puerto Rico, Switzerland, Bahrain, Poland, Norway, Greece, Chile, Finland, Mongolia, United Arab Emirates, New Zealand, Pakistan, Canada, Tibet, Kenya, Saudi Arabia, Ireland, Costa Rica, United Kingdom, Namibia, Afghanistan, Slovakia, Zimbabwe, United States, Denmark, Chile, Italy, Netherlands, Argentina, Ukraine, Venezuela, Turkey, Taiwan, Iran, Philippines, Australia, Bulgaria, Bolivia, Jordan, Lithuania, Sri Lanka, Morocco, Germany, Yemen, Czech Republic, Malaysia, Kuwait, Egypt, Iran, Oman, Brazil, Portugal, Belarus, Poland, Libya, Nigeria, Austria, Algeria, Russia, Ghana, Peru, India, Mexico, Hungary, Gabon, Sweden, Ecuador, Azerbaijan, Serbia, Mexico, Lebanon, Iraq, South Africa, Spain, Nepal, Kazakhstan, Vietnam, Qatar, France, Israel, Colombia, Bhutan, Gambia, Angola, Estonia, Romania, South Korea, Hong Kong.
