|
[China]
Trade Verify
Address: NO.12 HUANGHE RD ,HUANGJINAG , DONGGUAN, GD,CHINA
Contact name:David
VEDALI HARDWARE CO., LTD |
|
Verified Suppliers
|
|
|
Zinc Plated Hardware Nuts Bolts Pronged Tee Nuts Stainless Steel M3 to M10
We provide M3 to M10 T Nuts with carbon steel or stainless steel for wooden pieces applications , No burrs and free chrome 6 , high tensile strength and good secure performance.
T nuts also known as Tee Nuts , it is made in a sheet and has four prongs after bended these prongs can be bite into wooden material to prevent itself from backing . in the centre of t nut is a cylinder with inside threaded hole that provides a place for a mating threaded screw or shaft .
Specification
Generally , specification for t nuts are from M3 to M10 , we can provide more bigger sizes for special applicant .
| D2 | H | T | H1 | D1 | D3 |
| M3 | 5 | 0.8 | 4.2 | 4.8 | 13 |
| M4 | 6 | 1 | 5 | 5.6 | 15 |
| M4 | 8 | 1 | 7 | 5.6 | 17.8 |
| M5 | 6 | 1 | 5 | 6.5 | 15 |
| M5 | 6 | 1.1 | 4.9 | 6.4 | 17 |
| M5 | 8 | 1.3 | 6.7 | 7 | 17 |
| M5 | 9 | 1.1 | 7.9 | 6.4 | 17.8 |
| M5 | 10 | 1 | 9 | 6.4 | 17.8 |
| M6 | 8 | 1.2 | 6.8 | 7.7 | 17.8 |
| M6 | 8.9 | 1 | 7.9 | 7.5 | 17.8 |
| M6 | 9 | 1.3 | 7.8 | 7.7 | 19 |
| M6 | 12 | 1.3 | 10.7 | 7.7 | 19 |
| M6 | 14 | 1.3 | 12.7 | 7.7 | 19 |
| M8 | 11 | 1.5 | 9.5 | 10 | 22 |
| M8 | 12.3 | 1.5 | 10.8 | 10.8 | 22.5 |
| M8 | 15 | 1.6 | 13.4 | 10.3 | 22 |
| M8 | 16.5 | 1.4 | 15.1 | 9.8 | 22.5 |
| M8 | 17 | 1.6 | 15.4 | 9.9 | 22 |
| M10 | 12 | 1.8 | 10.2 | 12 | 25 |
Material
T nuts are normally made of carbon steel with zinc plated for the most applications but stainless steels are used for some special applications that need more heavy load and high strength requested .
Stainless steel
SUS 201 , SUS 304 ,SUS 316 , SUS 416 ,SUS 430 and SUS 420 .
Carbon steel
1008 , 1010 , 1018 , 1022 , 1035 , 1045 , SCM 435 and 40CRO
Finish
Metal T nuts have to be plated a film finishing for corrosion resistance , popular finishing is zinc , and there are more finishing types for choice .
| Finish | Colors | Thickness | Characteristics |
| Zinc | Blue ,White ,Black ,Yellow | 5-107μm | Bright and smooth surface ,corrosion resistance |
| Nickel | Silver | 1～3μm | Wear resistance ,bright appearance , anti-corrosion |
| Polishing | Silver | 0.01mm ( reference ) | Improving brightness of surface |
| Tin | Silver | 0.13～1.27μm | Good ductility ,corrosion resistance ,lower melting point ,eco-friendly ,brightness |
| Brass | Copper | 5gm～8gm | Good dispersibility ,Bright appearance |
| Dacromet | Grey | 4-8μm | High corrosion resistance , No hydrogen embrittlement ,Heat resistance ,Easy to plated more ,eco-friendly |
| Chrome | Silver white | 0．25～0．5μm | Harden surface ,Bright surface ,Heat resistance ,Wear resistance Corrosion resistance and eco-friendly
|
Directions for Installation
Compared to other nuts , T nuts are more easy and simple on operation and efficiency .
Step 1
Drill full hole on material that diameter is same as the cylinder diameter of t nut , the hole depth as the length of cylinder T nut .
Step 2
Insert cylinder of t nut into hole and strike T nut in a hammer to drive it into material and four prongs bite into material .
Step 3
Put threaded screw or bolt through object and then into t nut from opposite side .
Step 4
Rotate screw or bolt or a attached nut to fasten object on material .
Application
T nuts are mainly used to furniture to secure parts and make a collection parts .
