|
[China]
Trade Verify
Address: Junmin Road, Huangqiao Industrial Park, Taixing, Jiangsu, China (Mainland)
Contact name:jimmy(General Director)
Jiangsu Hanpu Mechanical Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Saving Energy Industrial Laser welding Enbossed Pillow Plate Evaporator in MVR Evaporatotion System
MVR Description
Mechanical vaporization re-compression system, which is called MVR which principle is to compress the second steam generated by evaporator by high efficiency steam compressor; this process transfers electric energy to heating energy and higher the pressure and temperature of second steam. The second steam with higher temperature will be sent to evaporation room to heat the product for evaporation. So the latent heat of vaporization of the second steam can be circularly used. Making use of less energy which is the mechanical energy of compressor blade wheel as the compression heat pump, energy is added into the heating medium and is circularly used in heating process. Under this circumstance, no need to add first steam as heating medium.
Main features:
The MVR evaporator energy saving technology is the most advanced international technology of evaporator, only need few live steam (When start evaporator need few live steam, during normal running almost no need live steam), which greatly reduce business operating costs, reduce environmental pollution.
Due to adopt compressor supply heat source, there is little temperature difference which compared with traditional evaporator, and can achieve moderate evaporation,greatly improved product quality and reduce fouling.
No need condenser or only need small size condenser, the structure and process are quite simple, it can be full automatic operation, continuous running, safety and reliable.
This evaporator internal system equipped with CIP clean pipeline, which can achieve clean in place, easy to operate and without dead angle.
Liquid material can be evaporated under low temperature (50-100℃) in this evaporator, the liquid material is uniform and without running material, not easy coking, material heating denaturation is minimal.
Due to use of 100% recycling secondary steam latent heat, completely avoid the use of live steam, so greatly reduced steam consumption.
For heat-sensitive materials can be used with vacuum pump, which can be done in close to absolute pressure under vacuum, so as to realize low temperature evaporation, the minimum evaporation temperature can be 50 ℃.
Simple process control and automation——Because of the small amount of fluid retention, the falling film evaporator can be change according to different vacuum degree/feeding capacity/ concentration/ temperature , which is the basic conditions for stable quality of products.
MVR Technical Characteristics
MVR technology uses the generated vapor for heat instead of expensive heat sources
MVR technology does not require a cooling tower, greatly reducing the use of cooling water
MVR technology is more efficient than traditional multi-effect evaporation technology saving energy and reducing operating costs
MVR technology is truly energy-saving, water-saving, environmentally-sound, and helps with resource recycling
MVR technology achieves low-temperature evaporation, greatly reducing the impact on your material
MVR technology system structure is simple, fully-automated, with continuous operation
MVR systems consist of an evaporator, a vapor compressor, separators, pumps, piping, instrumentation, and electrical control components
MVR systems can be designed around simple evaporators or sophisticated falling film tube evaporators
MVR systems can use simple vapor compression or sophisticated roots pumps
MVR systems can have low liquid holdup, or be larger volume tank systems
MVR systems can achieve a variety of evaporation, process design and fluid composition will determine this
Operation cost comparison
The operation of the two evaporation processes for the treatment is shown in the table.
Operation of two evaporation processes for treating paper waste water.
| item | 5 effect station | combined evaporation process | ||
| MVR pre concentration | 5-effect evaporation station | |||
| Evaporation water (t/h) | 100 | 64.28 | 35.72 | |
| Incoming concentration(%) | 10 | 10 | 20 | |
| Out concentration(%) | 45 | 20 | 45 | |
| Evaporator area(㎡) | 10000 | 8500 | 4000 | |
| Condenser area(㎡) | 800 | / | 300 | |
| Consumption | Steam (t/h) | 25 | / | 9 |
| Electricity(kWh/h) | 500 | 1600 | 180 | |
| Water(t/h) | 900 | / | 350 | |
| Running cost | RMB/hour | 4500 | 960 | 1633 |
| RMB/T water evaporation capacity | 45 | 25.93 | ||
| RMBx10000/Day | 10.8 | 6.2 | ||
| RMBx10000/Year(340days) | 3672 | 2115 | ||
Note:In operation cost estimation:steam 150rmb/t,electricity 0.6 rmb/kWh,water 0.5rmb/t.
The investment of combined evaporation process equipment increased: evaporator (2500 m2) 375x10000 RMB; MVR compressor 400x10000rmb, total 775x10000 RMB
Annual operating cost reduction of combined evaporation process: 3672-2115 = 1557 (10000RMB)
Investment increase payback period of combined evaporation process: 755 ÷ 1557=0.5year
It can be seen that taking the scale of 100t / h as an example, the combined evaporation process can recover the increased investment in half a year, and save 1557 (10000 RMB) every year in the future, with considerable economic benefits.
The handling capacity can be up to 100T/h, with advantages such as small floor space, compact structure, stable operation and so on.
Working principle drawing
Our Production Capability and certificate
