|
[China]
Trade Verify
Address: Junmin Road, Huangqiao Industrial Park, Taixing, Jiangsu, China (Mainland)
Contact name:jimmy(General Director)
Jiangsu Hanpu Mechanical Technology Co., Ltd |
|
Verified Suppliers
|
|
|
Falling Film Single And Multiple Effect Mvr Evaporator Equipment Manufacturers For Effluent Treatment
Principle
A vapor compressor, a heat exchanger, a crystallizer, and a forced circulation pump form the MVR forced circulation crystallization system.The system uses externally imposed power (a circulating pump) to move the solution and raw materials via the circulation pipe and into the heating chamber.As a result, the circulation rate is considerably increased.After passing through the heat exchanger for heating, the circulating fluid relieves pressure properly in the separator and partially evaporates, cooling the liquid to the pressure-corresponding boiling temperature.The secondary vapor that has been separated from the separator and processed by the compressor is then sent to the heat exchanger for shell side heat exchange, which maintains the evaporation temperature of the materials.When the system reaches a steady state, no additional fresh steam is required.
Advantage
1, Longer operating cycle:The boiling /evaporating process happens in the separator rather than on the heating surface so that the scaling phenomenon due to crusting and precipitation inside tubes is then minimized.
2, Optimized heat transfer surface:the flow rate inside tubes is determined by the circulating pump.
3, Suitable for easy -to-encrust and high viscosity liquids,acting as a concentrator in the multi-effect evaporation plant.
4, The forced circulation evaporator is operable as a crystallizing evaporator for salt solutions.
Performance Comparison for Different Evaporator
| Item | Single effect evaporator | multi-effect evaporator | TVR evaporator | MVR evaporator |
| Energy consumption | energy consumption is much higher than others, 1ton water will consume 1Ton steam in theory | comparatively energy conservation | Base on traditional multi-effect evaporator, one more effect added, but higher pressure steam driven needed | The most energy saving technology for evaporator, but 10-40kwh power consumption |
| Floor space | Small | large | large | small |
| Energy sources | steam & power, need steam pipe network and boiler | steam & power, need steam pipe network and boiler | steam & power, need steam pipe network and boiler, need high pressure steam. | electricity, don't need pipe network, all the close-loop circulation system |
| Automaticity | Semi automatic | Full automatic operation, continuous evaporation | Full automatic operation, continuous evaporation | Full automatic operation, continuous evaporation |
Processing equipment
About us
Jiangsu Hanpu Mechanical Technology Co., Ltd. is a company mainly
produce pillow plate and its related products,The company's
production base is located in the Huangqiao Industrial Zone of
Taixing, covering an area of 300 acres. The companies involved are
in the industry of new material, new energy, medicine, chemical,
environmental protection, food, and beverage, etc.
Jiangsu Hanpu is an internationally engineering company that
integrates technical consulting, design, procurement, construction,
installation and driving into one, providing engineering EPC
general contract, project management, engineering supervision and
other services. The company is Committed to be the first and
world-renowned technology and technology engineering company in
Asia, providing cutting-edge technology and one-stop solutions for
the world's industries.
