Active Member
|
[China]
Address: Add: F4, Bld.4, Xifa B industry Zone, Yintian, Xixiang, Bao'an, Shenzhen, China.
Contact name:Frank
Shenzhen Handar Optical Technology Co.,Ltd |
|
|
| INTRODUCTION: | |
| Item | Fiber Optic HDMI Network Super Extender |
| Product Dimension | TX: 13*8.5*2.4cm RX:13*8.5*2.4cm |
| Color | black |
| HDMI Parameters | |
| Power Adapter | DC5V2A * 2PCS |
| DDC signal voltage | 5Vp-p (TTL) |
| HDMI input resolution supported | 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz |
| HDMI output resolution supported | 480p@60Hz; 576p@50Hz;720p@50/60Hz;1080p@50/60Hz |
| TMDS bandwidth | 10.2Gpbs |
| Fiber Parameters | |
| Centre wavelength | 1310nm |
| Connecting interface | SC port |
| Fiber Type | SMF (single mode fiber) 0-20km |
| Linked-circuit loss | Equal or less than 14dB |
| Output power | Equal or more than -11dBm |
| Receive sensitivity | Equal or less than -32dBm |
| Ifrared remote control | Supports 38kHz |
| Power consumption | TX:5W RX:5W |
| FAQ | |
| Q1: The yellow LED flickers but slowly ? | 1) Check the connection of extender sender and receiver and make sure it’s correct. 2)Check whether the hdmi video source outputs correctly or not. 3)Use another working-well hdmi cable to connect the video source and extender sender. |
| Q2: The yellow LED flickers quickly but no picture outputs? | 1)if input video source is HDMI graphic card,please make sure the HDMI graphic card output resolution is supported by HDMI display. 2) Check whether the hdmi cable of extender receiver is connected-well or not. 3)Make sure all the HDMI cable is working well. |
| Q3: Yellow LED doesn’t light? | 1) Make sure the optical fiber is connected correctly. 2)Check the optical fiber is working well. |
| Q4: HDMI output display is abnormal or flickers? | Press the “reset” button to go back to default setting. |
| Q5: The IR remote control doesn’t work? | 1) Check the connection of IR blaster and IR receiver and make sure it’s correct. 2)Make sure the IR remote control can support 38kHz signal. |
Applications
About Us
2009 HANDAR OPTICS Established in Nov 2009 , with professional R&D and sales team who had been working in fiber optical telecommunication field since 2004 .
2010 HANDAR OPTICS started to produce full range of multi-functional video/audio/data/Ethernet/Telephone/Alarm to fiber converters and became to one of the leading manufacturers in this field
2011 HANDAP OTPCIS founded our engineers team to develop the SFP transceivers , and start to produce 155M and 1.25G SFP transceivers at Aug 2011
2012 HANDAR OPTICS started the project for 10G SFP+
2013 HANDAR OPTICS founded our engineers team to develop the Industrial level Ethernet Switch and POE switch . and stated to produce at the end of 2013 .
2014 HANDAR OPTICS started the project for 40G QSFP/CFP/CFP2
2015 HANDAR OPTICS improved our products for analog video/audio/data multiplexer to High-Definition series , include Analog high-definition TVI/CVI/AHD and Digital high-definition SDI/HDMI . We became to the leading manufacturer of such products in Shenzhen China .
2016 HANDAR OPTICS moved to new office with better workshop which allow us to offer better products and services to our partners .
2017 HANDAR OPTICS will keep focusing on fiber optical telecommunications field and offer to all our partners higher quality and better services .
Long Length 1080P HDMI to Fiber Ethernet Fiber Media Converter Extender
