Home Companies Nanjing Token Electronics Science&Technology Co., Ltd.

300A EV Charger Closed Loop Hall Effect Current Sensor

Nanjing Token Electronics Science&Technology Co., Ltd.
Active Member

Contact Us

[China] country

Address: NO.80,FEITIAN AVENUE,INDUSTRIAL CLUSTER LUKOU TOWN

Contact name:Suki

Inquir Now

Nanjing Token Electronics Science&Technology Co., Ltd.

300A EV Charger Closed Loop Hall Effect Current Sensor

Country/Region china
InquireNow

Product Details

Common Accuracy Hall Effect Dc Current Sensor TBC-LTA Series Custom-made,two type of connector for choose.

 

The TBC-LTA Series current sensor is a closed loop device based on the measuring principle of the hall effect and null balance method , with a galvanic isolation between primary and secondary circuit, the size of primary doesn’t affect test precision, no matter the location of primary in the hole of current sensor, It can really measure resolution 1000:1 and uses for precision measurement of DC, AC and pulse current.

 

Electrical data(Ta=25℃±5℃)

 

Type


Parameter

TBC100LTA

TBC200LTA

TBC300LTA

Unit

Rated current(Ipn)
100200300A

Measure range(Ip)
300(±18V,56Ω)600(±18V,.0Ω)900(±18V,2.0Ω)A

Turns ratio(Np/Ns)
1:20001:20001:3000 


Measure resister

with ±12V

@±100Amax

150(max)

@±200Amax 50(max)@±300Amax 50(max)Ω
@±200Amax 50(max)@±400Amax 5.0(max)@±600Amax 2.0(max)Ω

 

Rated output (Isn)

 

±50±0.5%

 

±100±0.5%

 

±100±0.5%

mA
Supply voltage±12~±18V
Power consumption≤20+Ip(Np/Ns)mA
Offset current@Ip=0 ≤±0.2mA
Offset drift@ -40℃~85℃        ≤±0.5mA

Response time
@100A/μS,10%-90% <1.0µs
Linearity@Ip=0-±Ipn ≤0.1%FS

Galvanic isolation
@ 50HZ,AC,1min 6KV
di/dt>100A/µs
Bandwidth@ -3db DC…150KHz

 

Applications

 

Variable speed drives

Welding machine

Battery supplied applications

Uninterruptible Power Supplies (UPS)

Electrochemical

Frequency converter

 

Mechanical dimension(for reference only)

 

 

 

Remarks:

1. All dimensions are in mm.

2. General tolerance ±1mm

 

Directions for use

 

Is will be in a forward direction when the Ip flows according to the direction of the arrowhead.

The primary conductor should be≤120℃.

The dynamic performance (di/dt and the response time) is the best when the primary hole is fully filled with the bus bar.

 

Standards

  • UL94-V0.
  • EN60947-1:2004
  • IEC60950-1:2001
  • EN50178:1998
  • SJ 20790-2000

 

General date

 

 ValueUnitSymbol
Operating temperature-40 to +85ºCTA
Storage temperature-40 to +125ºCTS
Mass(approx)100gM

 

Characteristics chart

Pulse current signal response characteristic                Effects of impulse noise

Hot Products

Programming hall sensor TKC-TF512 maily used in BMS of electric vehicle TKC-TF512 series is a kind ...
Wide Range Measurement 4800A Hall Effect sensor for inveter use TKC-GT1540 TKC-GT1540 series is a ...
1000-20000A Open Loop Hall Effect Current Sensor For Frequency Converter Applications Variable speed ...
High Precision Open Loop Hall Effect Current Sensor TKC-EKA Series Dismountable Open Loop Hall ...
High Sensitivity Hall Effect Sensor Non Contact Current Sensor Ta=25℃±5℃ Applications AC variable ...
Non Contact Hall Effect Dc Current Sensor / High Current Hall Effect Sensor Applications Variable ...