BEIJING HOPELASER TECHNOLOGY CO LTD |
|
Mini Powerful Cavitation + Vacuum + Fractional Rf Body Slimming
Equipment 3 Heads
The theory of Elight (IPL + RF)
Advanced technologies: bipolar RF (radio frequency) + IPL(intense
pulsed light), can be used together or separately. Perfect
treatment results can be expected. The RF energy can penetrate into
the dermis layer and directly deliveries to the hair follicle on
skin below 8 mm. Integrating with the IPL energy, good treatment
result will show you in short time. In addition,
This thermal energy stimulates production of new collagen and
re-arrange collagen tissue ,The subsequent heating further tightens
the skin tissue and reduces wrinkles . the most importance is that
theIPL with contact cooling system inside is effective on the
epidermis that greatly reduce the pain during the treatment. The
stable performance makes the safety in the whole process
Theory of 40K ultracavitation
The Ultracavitation+RF beauty equipment is newest equipment which
uses the most advanced technology. It combines the advantage of
Ultracavitation, . The Ultracavitation uses ultrasound cavitation
effect to cause the air bubbles around lipocyte membranes to break
up. The broken lipocyte will then be absorbed and metabolized out
of human body by lymphatic system. It has a perfect treatment
result for weight losing, burning fat cell , explode fat cell etc .
Theory of Fractional thermal RF
Fractional RF delivers accurate Bipolar RF energy to the skin by a
tip built of an array of small pins and return electrodes to
createmicroscopic thermal zones (MTZ). The RF energy introduce
fractional thermal into the deep dermis and create potential
healing effects in the microscopic thermal zones. Undamaged tissue
between the electrode pins acted as a “healing server” to
accelerate the collagen rebuilding and skin tissues remodeling.
Unlike the traditional laser therapy, the majority of the
fractional RF energy is focused in the dermis while only a small
percentage of the surface is effected, resulting in deep volumetric
dermal heating and ultimate result. On the contrary, laser stays
large volume on the surface, while only a small amount of energy
penetrates deep into the dermis.
Advantage of fractional RF
1.Without Pigment
The energy of RF plays a role in dermis directly, therefore, there
is no heat summation on the dermis to avoid the possibility of
blister and pigment precipitation problems.
2. Without Side Effect
The recovery time is short, such as Red face will be decreased in
1~2days, the Cutin will be dropped within 3~4days. It won't affect
the daily life after treatment. and the patient can clean face and
make up directly after operation as usually.
3.Two Treatment Methods
There are two treatment ways with Dual Matrix tip and RF
Microneedle tip to meet the needs of different clients.
Function
1) Applications of Elight (IPL+RF),SHR system
IPL hair removal , skin rejuvenation , shrink pores ,
photo rejuvenation acne treatment and vascular lesions,
pigment removal :epidermis speckle , fleck aging spot , chloasma
etc .
2) Application of Fractional thermal RF:
RF lipolysis which break up fat cell
It is mainly dealing with both face and body skin lifting . wrinkle
removal . skin tightening .body shaping /contouring
3) Application of Cavitation
Cavitation explode fat cell . body slimming . weight loss.
Cellulite reduction . fat loss ,
Parameter
Light source | Intense Pulsed Light |
Wavelength | 480/530/590/640/690~1200nm (IPL Standard) 430/560/750~1200nm (Optional) |
Pulse Delay Time | 5~50 ms |
Elight energy | 10~50 J/cm2 |
Pluse duration | 2~15ms |
Pulse Sequence | 1~15 pulses (adjustable) |
Operative LCD Interface | 8.0 TFT True Color LCD touch screen |
Handpieces 6 pieces | 1) Elight treatment head ; 2) Thermal RF 3) Ultrasonic cavitation head ; |
Spot size | Elight: 12x30 mm² (ELIGHT STANDARD) 15x50 mm² (Optional ) Cavitation:50 mm² : Thermal Fractional rf with 64 micro-needle tips and thermal tips |
Cavitation frequency | 40KHz |
Cavitation Max Power | 100 W |
Fractional RF frequency | 10 MHz (output frequency); |
Size | Aluminum box size : 73*58*53 cm |
Elight Power | 2000W |
Electrical source | 220V/50HZ or 110V/60HZ |
G.W | 45KG |
Befor and after:
OEM/ODM
With rich experiences and quite a number of successful OEM/ODM
orders that have gained great approval and satisfactions from the
clients, OEM/ODM service has become our specialty. We can: * Put
your company/device logo or name onto a device body or inside its
screen display
*Offer a device with a special color that you want the device to be
* Offer a device with a special language that you want the device
to display
* Design & produce a new device by your order requirement(offer
our design)
* Update a former device into a newer device(on the basis of our
device)
* Produce a totally new device that meets your local market(on
basis of your design).
* Update a former device into a newer device(on the basis of your
device)
* Offer or produce spare parts for your device according to your
requirement.
We promise you that every individual OEM/ODM service is
confidentially managed here and only available to your own order.
We strictly prohibit disclosing or using one OEM/ODM result into
another client’s order. This makes it easy for you to become a
professional “manufacturer”in local market and promote the product
more freely and safely!